Decomposition of a with an initial concentration

Assignment Help Chemistry
Reference no: EM13681708

Regard as the first order decomposition of A with an initial concentration of 2.3 M. If k= 7.3 x 10-4 s-1, Explain what is the concentration of A after 1.2 x 103 seconds?

5.2 x 10-1 M

9.6 x 10-1 M

3.6 x 10-1 M

Data are missing to answer

Reference no: EM13681708

Questions Cloud

Aqueous solution of sodium hydroxide and hydrogen peroxide : 1-ethylcyclohexene + diborane in diglyme pursue by an aqueous solution of sodium hydroxide and hydrogen peroxide.
Explain what is the overall resistance of the wire : If A length of #8 copper wire radius =1.63 mm has a mass of 24.0 kg as well as a resistance of 2.061 ohm per hm. Explain what is the overall resistance of the wire
Complete dissolution of nacl how much nacl : Presuming complete dissolution of NaCl how much NaCl (in g) must be added per liter of waste water to ensure that the soluble silver concentration is less than or equal to 1 µg/L? Presume low pH, so ignore any complexion of silver with OH-.
The subsequent names are all incorrect or incomplete : The subsequent names are all incorrect or incomplete, however they represent real structures. Depict each structure and name it correctly.
Decomposition of a with an initial concentration : Regard as the first order decomposition of A with an initial concentration of 2.3 M. If k= 7.3 x 10-4 s-1, Explain what is the concentration of A after 1.2 x 103 seconds?
Find out the rate law and the rate constant reaction : Utilize the data below to find out the rate law and the rate constant (k) for the subsequent reaction.
Compute the initial concentrations of fe3+ and scn- : A solution is prepared by adding 18mL of 0.200 M Fe(NO3)3 [iron (III) nitrate] and 2mL of 0.0020 M KSCN. Compute the initial concentrations of Fe3+ and SCN- in the solution
Compute the equilibrium constant for the reaction : The reaction reaches equilibrium as well as the absorbance is found to be 0.352 using a spectrophotometer. If the proportionality constant between absorbance as well as concentration of FeSCN2+ is known to be 3553, compute the equilibrium constant..
Depict skeletal structure of major organic product : Depict skeletal structure of major organic product of 1-methylcyclopentene treated with br2 and h20

Reviews

Write a Review

Chemistry Questions & Answers

  Explain what masses of cacl2 and water should be used

You need to dissolve CaCl2 in water to make a mixture that is 38.0% calcium chloride by mass. If the total mass of the mixture is 681.2 g, what masses of CaCl2 and water should be used

  To what volume should dilute solution to obtain solution

To what volume should you dilute 95mL of a 12.0M H2SO4 solution to obtain 1.80M H2SO4 solution

  Compute the heat capacity of the calorimeter

After about five minutes of mixing, the final temperature of the solution inside the calorimeter reached 37 C. Calculate the heat capacity of the calorimeter (J/C - joules per degree).

  State methyl orange is made by diazotizing the sodium salt

Methyl orange is made by diazotizing the sodium salt of sulfanilic acid (p-aminobenzenesulfonic acid) followed by coupling with N,N-dimethyl aniline. Write equations for these reactions,giving the structure of methyl orange.

  State total heat evolved by the reaction by adding the heats

Total heat evolved by the reaction by adding the heats required to raise both the solution and the calorimeter to the maximum temperature. 5). Heat evolved per mole of Mg 6) Change in enthalpy for the following specific reaction. Be sure to indica..

  A phosphorous acid buffer needs to be prepared to a ph of

a phosphorous acid buffer needs to be prepared to a ph of 5.92 given a 120ml solution of 25mm phosphorous acid how many

  Explain the molar mass of fes2

Determine the volume of SO2 (at STP) formed from the reaction of 96.7g of FeS2 and 55.0 L of O2 (at 398K and 1.20 atm). The molar mass of FeS2 is 119.99 g/mol.

  What is the half-life

Two scientists are experimenting with pure samples of isotope X, a highly radioactive substance. The first scientist has a sample with a mass of 20 grams.

  Explain the reaction cyclohexanol and phosphorus tribromide

What is the IUPAC substitutive name of the organic product formed in the reaction between cyclohexanol and phosphorus tribromide

  In the manufacturing of computer chips cylinders of silicon

in the manufacturing of computer chips cylinders of silicon arecut into thin wafers that are 3.00 inches in diameter

  Explain organic or inorganic reagents may be used

Using the grignard reaction, carry out the following transformations. Any necessary organic or inorganic reagents may be used. Name all reactants and products.

  Explain what is the concentration of the nitrate ion

What is the concentration (in M) of the nitrate ion when 17.3 mL of a 0.633 M solution of potassium nitrate is combined with 15.3 mL of a 0.662 M solution of aluminum nitrate to a final volume of 48.1 mL

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd