Create a line robot using an ir led two photodiodes

Assignment Help Computer Engineering

Reference no: EM133718852

Assignment: Line Following Robot with Triangular Op Amps Project

Creating a line following robot using an IR LED two photodiodes, differential op-amps, and a microcontroller can be quite simple at a high level. Here's a basic schematic and description:

Schematic:

I. IR LED:

1. Connect the anode (longer lead) of the IR LED to a current limiting resistor (say, 220 ohms). The other end of the resistor is connected to Vcc (e.g., 5V or 3.3V depending on your components).

2. Connect the cathode (shorter lead) of the IR LED to ground.

II. Photodiodes:

1. Photodiodes can be operated in photoconductive or photovoltaic modes. For this application, we will use the photoconductive mode.

2. Connect the cathode (usually the longer lead) of both photodiodes to Vcc.

3. Connect the anode (usually the shorter lead) of both photodiodes to the inverting input of their respective op-amps.

III. Differential Op-Amps:

1. For each photodiode, connect its anode to the inverting input of an op-amp.

2. Connect a feedback resistor (Rf) from the output of the op-amp to its inverting input.

3. Connect the non-inverting input of the op-amp to a reference voltage (usually half of Vcc, which can be obtained using a voltage divider).

4. The output of each op-amp will then give a signal proportional to the amount of IR light detected by the respective photodiode.

IV. Microcontroller:

1. Connect the outputs from both op-amps to two analog input pins on the microcontroller.

2. Connect two of the microcontroller's GPIO pins to a motor driver module to control the movement of the robot.

V. Motor Driver and Motors:

1. Use a motor driver module (like L293D or L298N) to control the direction and speed of the robot's two motors.

2. Connect the GPIO pins from the microcontroller to the input pins of the motor driver.

3. Connect the motors to the output terminals of the motor driver.

Use the triangular op amps for the drawing.

Reference no: EM133718852

Questions Cloud

Receiving intravenous mannitol for treatment of brain tumor : A client is receiving intravenous mannitol for treatment of a brain tumor. The client's intracranial pressure before administration of the mannitol was 14 mm Hg

How might their choice reflect on their character : How might their choice reflect on their character and their suitability as a leader? Discuss broader ethical implications of traditions like the Harmony Trial.

Explain correlation to your client : Explain correlation to your client. Calculate the estimated correlation between Blandy and Gourmange. Does this explain why the portfolio standard deviation

Causes of peripheral vascular disease and venous disorder : List Cardiovascular diseases and common problems of patients with this disorder. List causes of peripheral vascular disease and venous disorder.

Create a line robot using an ir led two photodiodes : Create a line robot using an IR LED two photodiodes, differential op-amps, and a microcontroller can be quite simple at a high level.

Describe the ethical implications of each alternative : Describe the ethical implications of each alternative. Consider external and internal aspects of ethical proposals. What are the costs in each of alternatives?

Recently undergone cataract surgery and lens implantation : A patient has recently undergone cataract surgery and lens implantation. Predict which topic is appropriate to discuss with the patient.

Create a hypothesis of what you think the probable cause : Create a hypothesis of what you think the probable cause for each issue is, based on the information gathered in the first step. You may want to come up

Review the results of your vitamin and mineral intake : Nutrition 210 My Diet Analysis Project - Review the results of your vitamin and mineral intake. In each box, discuss how you can improve your results

User Account

All Pages