Reference no: EM132451674

CPCCBC4014A - Prepare simple building sketches and drawings - Open Colleges

Part 1: Prepare for sketching and drawing

Part 1.1 - Complete the table below by listing details of three types of drawings that you will prepare for David and Tara for a quote.

Part 1.2 - Complete the table below by listing tools and equipment you will use to produce your drawings and to inspect and measure the site.

Part 1.3 - What WHS procedures will you follow when you inspect David and Tara's site and take measurements? (max. 150 words)

Part 2: Produce sketches and drawings

Part 2 requires you to create two sets of freehand drawings for the clients. All drawings produced for this assessment must follow theseinstructions.

Drawing 1: Site Plan

In the first drawing you must reproduce the provided Site Plan drawing. You are then to select a space in the allocated zoned area on the site, to add the footprint for the proposed double garage with workshop (6m x 10m).View the site plan at Appendix A.

Your 2D freehand Site Plan drawing must include:
• Scaling at 1:200 on A3 paper
• All services, stormwater pipe work, setbacks, boundaries, driveways and contour lines
• International drawing conventions
• All notations as indicated
• A title block (landscape format)

Drawing 2: Floor Plan - Garage with Workshop

Your next Part is to prepare a 2D freehand sketch plan at a scale of 1:50 of your design for the double garage and workshop.

Create the stand-alone floor plan on A3 paper. Include the following:
• Double garage with workshop area (6m x 10m)
• All external and internal walls
• Roof outline using a dashed line (i.e. - - - - - )
• Workbench/es should be shown in the workshop
• All doors - i.e. roller door (4.8m x 2.1m), external access to workshop (door = 920mm)
• Natural lighting source (i.e. window/s, skylight, etc.)
• External rainwater tank (2,000 litres)
In final preparations, please include the following drawing conventions:
• Dimensions
• Drawing title (‘Garage and Workshop Plan')
• Drawing labels (i.e. double garage with workshop area 6m x 10m,)
• Titleblock (landscape format)
• Notation describing each design inclusion (e.g. door, roller door, window, skylight,workbench,rainwater tank)

CPCCBC4012B Read and interpret plans and specifications

Instructions
Complete each of the Parts below based on this scenario.

Scenario
You have previously prepared sketches and drawings for a double garage and workshop for clients David and Tara King. The couple have had the site plans prepared for construction of their new home and double garage. They have organised an on-site meeting with you to discuss their future plans to build their first home, including a variation to the proposed double garage.
David and Tara have supplied you with their sketch of the proposed residence over the site plan

Part 1

Part 1.1 -Complete the table below by listing five types of drawings you will need in order to prepare a quotation and explain the construction process.

Part 1.2 -Write a brief explanation (approximately 50 words) of each of the aspects of drawing listed below.

Part 2
You will need the drawings you prepared for assessment 32633/01 to complete this Part.

Scenario

The clients, David and Tara King,are satisfied that the double garage withworkshop will allow on-site storage of most construction materials while they build their new home. The rainwater tank will suffice and cater for all new vegetation they have planted at the rear of the property.

The Kings would now like you to prepare a sketch plan of the proposed single-storey residence as shown in Appendix A (see page 9). You can choose to re-draw the new site plan from scratch, make a scanned copy or reuse your original site-plan sketch (as outlined in the previous assignment) to include the King's residential footprint.

Follow these instructions to prepare drawings that reflect the client's variation to the original plans.

Part 2.1 -Drawing: Repurposed Site Plan

Re-purpose your existing Site Plan for the double garageand workshop from the previous assessment 32633/01. You are to produce the residential footprint (the outline of the building only) on your site plan as indicated by the clients.

Your 2D freehand Site Plan with Building footprint drawing must include:
• Scale at 1:200 on A3 paper
• All drawing patterns/hatching as indicated over the residence
• AHD (Australian Height Datum) levels with area labels
• All indicated services, stormwater pipe work, setbacks, boundaries, driveways and contour lines and trees
• International drawing conventions
• A title block
• North Point

Part 2.2 -Drawing: Orthographic drawing
You must create the following drawings (scale 1:50 on A3 paper) of the double garage with workshop:
• two elevations (your choice of sides)
• one section through the building
• the roof plan (view from the top, no structural elements to be included)
Your drawing must:
• be drawn freehand, at a scale of 1:50on A3 size paper, or across multiple pages
• show the natural lightingto the garage (e.g. skylight, window/s)
• include the 2,000-litre rainwater tank showing tie-in plumbing with piping
• use international conventions, including object labels and notation
• include a title block

Part 3

Part 3.1 - Prepare a written example to explain your understanding of the difference between provisional sum (PS) and prime cost (PC). Maximum 150 words.

Part 3.2 -Complete the Site features tablebelow by listing three key features of the site and researching and indicating specific Building Code of Australia (BCA) requirements and standards.

Attachment:- Prepare simple building.rar