Course ab of a five-sided traverse runs due east

Assignment Help Civil Engineering
Reference no: EM13529933

Course AB of a five-sided traverse runs due east. From the given balanced interior angles (listed below) to theright, compute and tabulate the bearings and azimuths from northfor each side of the traverse.

A = 108º46'49", B = 115º20'10",C = 94º30'22", D = 99º54'37",E = 121º28'02"

Reference no: EM13529933

Questions Cloud

Explain why the two graphs would be the same or different : Suppose a cart was given a push down a ramp, starting at the end close to the motion detector, Describe what the acceleration vs. time graph will look like for this case, Explain why the two graphs would be the same or different
What is the mass of the object : The electric field between the plates of a parallel-plate capacitor is horizontal, uniform and has a magnitude E. What is the mass of the object
What is the pressure inside the glass : A glass is cleaned in 45 0C hot water and placed onthe table bottom up. The room air at 20 0C thatwas trapped in the glass gets heated up to 40 0C andsome of it leaks out so the net resulting pressure inside is 2 kPaabove ambient pressure of 101 kPa...
Determine the reactions on the beam : Determine the reactions on the beam. The support at B can beassumed to be a roller.
Course ab of a five-sided traverse runs due east : Course AB of a five-sided traverse runs due east. From the given balanced interior angles (listed below) to theright, compute and tabulate the bearings and azimuths from northfor each side of the traverse.
Compute and tabulate the bearings of the sides of a regular : Compute and tabulate the bearingsof the sides of a regular pentagon (polygon with five equalangles), given the starting direction of sideAB.
Compute azimuths of all lines for aclosed traverse : Compute azimuths of all lines for aclosed traverse ABCDEFGHA that has the following balanced angles tothe right, using Bearing AB = N56º18'42"W.
What is the new quality and pressure : Water at 120 0C with a quality of 25 % has itstemperature raised 20 0C in a constant volumeprocess. What is the new quality and pressure? Draw P-vand T-s diagrams
Compute the angular misclosure : The interior angles in a six-sided closed polygon traversewere observed as:

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the permeability of the soil

The Permeability of a semi-impervious soil was evaluated in a falling-head permeameter whose head decreased from 40 to 15 inches in 5min. The body diameter was 0.1 inch, and the sample length and diameter was 2 inches.

  What is the max price per ton the company should pay

The supplier says it would prefer to sell the company a 65% NaOH solution and the company says the water content is immaterial as long as the equivalent costs are the same including freight.

  Find the resultant force from all fluids acting on the gate

a tank is filled with oil (specific gravity 0.8) and water to a depth of 10 meter and 6 meter respectively. Find the resultant force from all fluids acting on the gate of 1.8 meter by 9 meter.

  Determine the drivers perception

After a few drinks under exactly the same conditions, the driver fails to stop in time and strikes the object at a speed of 35 mi/hr. Determine the driver's perception/reaction time before and after drinking.

  Find the degree of saturation and water content

A moist soil sample wights 346g.After drying at 105 degree celsius it then wights 284g. the specific gravity of the mass and of the soil is 1.86 and 2.70.

  Find the horizontal and vertical forces exerted on the poll

What is the maximum weight that can be suspended on a 16 Kg poll, 3/5 from the end. The maximum tension of the 30 degree guy-wire is 1500 N. Find the horizontal and vertical forces exerted on the poll by the hinge.

  Estimate the flow rate when draw down at the well

A fully penetrating well of 30 cm diameter in an unconfined aquifer of saturated thickness 50 m was found to give the following draw down - discharge relationship under equillibium condition.

  Determine the minimum clearance required

A vertical curve is formed when a rural highway passes under a bridge joining a -8% grade to the horizontal grade satisfying the requirement for safe speed of 90 Km/hr . Determine the minimum clearance required betewen the highway pavement surface..

  Determine the minimum time needed for the plate temperature

Consider a 1000-W iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-T6 (density = 2770 kg/m^3 and c(p)=875 J/kg C). The base plate has a surface area of 0.03 m^2.

  Determine the npsh at the flow rate

The line is standard commercial steel pipe 75mm internal diameter. From the column to the pump inlet, the line is 25m long and contains 6 standard elbows and a fully open gate valve.

  Determine theoretical maximum efficiency of the heat engine

Assume the collector provides this energy to a thermal storage unit (a thermal reservoir) at 220oC. A heat engine receives energy from this thermal storage unit and discharges energy by heat transfer to the surroundings at 20 C

  Determine by analysis which of the cable a or b has tension

A body with a mass of 250 kg is supported by the flexible cable system. Determine by analysis which of the cable A, B, C, or D has the largest tension.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd