Cooling circuit of an air conditioning system problem

Assignment Help Physics
Reference no: EM13552953

The cooling circuit of an air conditioning system is a heat exchanger and the outside air passes. The air flow is 40 cubic meters / min, enters a40 ° C, 1.1bar, and exits at 20 ° C, 1 bar.The R-12 enters the tubes with a quality of 40% and 10 º C and leaves as saturated vapor at 10 ° C. Ignoring the heat transferbetween the exchanger and the environment, and neglecting the effects of kinetic and potential energy, determine to a steady state.

a) The mass flow of refrigerant in kg / min

Reference no: EM13552953

Questions Cloud

How much work was done by the workers force : A worker pushed a 27 kg block 7.6 m along a level floor at constant speed with a force directed 32° below the horizontal. What was the increase in thermal energy of the block-floor system?
Determine the relative humidity of the air in the container : A small rigid cylindrical vessel contains 1 kg of humid air at 80oC under a total pressure of 1 bar. The humid air inside the vessel contains 0.150 kg of water vapor. Determine the relative humidity of the air in the container.
Determine the enthalpy change and internal energy : Determine the enthalpy change and internal energy change of ammonia in J/mole, as it is heated from 350 K to 600 K, using the ideal gas heat capacity given by the Shomate Equation.
Determine rate of heat transfer-relative humidity at exit : Moist air at 12oC and 80% R.H. enters a duct at a rate of 150 m3/min. The mixture is heated until it exits at 35oC. The pressure remains constant at 100 kPa. Determine (a) the rate of heat transfer, and (b) the relative humidity at the exit.
Cooling circuit of an air conditioning system problem : The cooling circuit of an air conditioning system is a heat exchanger and the outside air passes. The air flow is 40 cubic meters / min, enters a40 ° C, 1.1bar, and exits at 20 ° C, 1 bar.The R-12 enters the tubes with a quality of 40% and 10 º C ..
Determine the final pressure-temperature and humidity : A 50 m3 insulated chamber containing air at 40oC, 100 kPa, R.H. 20%, is connected to another 50 m3 insulated chamber containing air at 20oC, 100 kPa, R.H. 100%. The valve is opened and the system is allowed to reach thermal equilibrium. Determine the..
A bicycle wheel with a radius-moment of inertia : A bicycle wheel with a radius of 38 cm is given an angular acceleration of 2.80 rad/s2 by applying a force of 0.25 N on the edge of the wheel. What is the wheel's moment of inertia?
What is the magnitude of the angular momentum of the wheel : A solid disk with a moment of inertia of 3.53 kg m2 is spinning about its axle such that the disk rotates by 2p radians (1 rev) every 0.300 s. The axle is tilted through an angle of p radians (180°) in a time of 0.28 s.
Energy eigenvalues and eigenfunctions of the quantum : Compute explicitly energy eigenvalues and eigenfunctions of the quantum two- dimensional harmonic oscillator described by the Hamiltonian operator associated with the classical Hamiltonian H =(1/2m)((Px)^2+(Py)^2)+(k/2)(x^2+y^2)

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd