Container holds a two phase mixture of liquid water

Assignment Help Mechanical Engineering

Reference no: EM13708072

A rigid container of volume 0.5 m³ is placed on a hot plate. Initially the container holds a two phase mixture of liquid water and vapor at 1 bar with a quality of 0.5. As heating continues determine the following:

a) The temperature when the pressure reaches 1.5 bars

b) The mass of vapor present initially and at 1.5 bars

c) The pressure and temperature when the container holds only saturated vapor.

Reference no: EM13708072

Questions Cloud

Self-interstitials do not form in pure metals : Given values of the diffusion coefficient for carbon in iron at 850°C and 950°C, we can calculate the activation energy for the diffusion of carbon in iron. the activation energy for vacancy migration in copper, we can calculate the activation energy..

Oxygen-rich and virtually carbon-free environment : An iron-carbon alloy initially containing 0.55 wt% C is exposed to an oxygen-rich and virtually carbon-free environment at 1325 K. Under these conditions, the carbon diffuses from the alloy and reacts with oxygen at the surface.

Determine the amount if change in internal energy : A system experiences a heat transfer into the system of 50 Btu and does work against the surroundings of 2100 ft-lbf reducing its horizontal velocity from 2 fps to 1.5 fps. The mass of the system is 3 lbm. Determine the amount if change in internal e..

Weight and the air pressure outside the roof hold it down : Movement of stagnant air over a surface typically decreases the pressure that air exerts on the surface it was in contact with, and higher air velocities usually result in more significant pressure drops. This pressure drop from rapidly moving air ac..

Container holds a two phase mixture of liquid water : A rigid container of volume 0.5 m3 is placed on a hot plate. Initially the container holds a two phase mixture of liquid water and vapor at 1 bar with a quality of 0.5.

What is the resolution error-input frequency : What is the resolution error (or quantization error) if a +/- 10V DAQ card has a 3 bits? If a 10 Hz signal is sampled at 45 Hz. For an input frequency of 10 Hz, If you want at least 20 points/second, what should your sampling frequency be? If you wan..

Determine the thrust required tr to sustain this flight : An airplane weighing 70000 lb is in a cruise flight (constant altitude, constant velocity, level flight) at an altitude of 30000 ft, with a velocity of 0.5 Mach. Its wing area is 4000 ft2. Given the drag polar of the airplane as CD=CD,0+0.05CL2; CD,0..

Determine the atomic hydrogen to carbon ratio of the fuel : A new liquid fuel with formula CHz is proposed for use in spark-ignition engines. To determine the fuel properties, a sample of fuel at 25 degress C was placed in a constant volume bomb calorimeter. Oxygen at 25 degress C was admitted to the bomb and..

Calculate the absorbed radiation per unit area of absorber : For an hour 11 AM to 12 noon on a clear winter day, IB = 1.38 MJ/m2, and ID = 0.41 MJ/m2. Ground reflectance is 0.6. For this hour, the incidence angle ? for the beam radiation is 17°, and RB = 2.11. A collector with one glass cover is sloped 60° and..

User Account

All Pages