Constant-volume process and pressure process

Assignment Help Mechanical Engineering

Reference no: EM13710273

A piston-cylinder assembly contains 3 lb of water initially at 95 psi and 350 F. The water undergoes 2 processes in a series. First a constant pressure process and then a constant-volume process. At the end of the constant volume process the temperature is 250 F and the water is a two phase liquid vapor mixture with a quality of 50% Neglect Changes in KE and PE

A) Sketch the T-V and P-V diagrams showing the jet states and processes

B) Determine the work and heat transfer for each process all in BTU

Reference no: EM13710273

Questions Cloud

What is the poly tropic exponent of this process : Air, initially at 160 kPa and 325 K undergoes a polytropic state change to 256 kPa and 357.5 K. What is the poly tropic exponent of this process?

What is the volume in the container : An insulated rigid tank contains a saturated liquid-vapor mix of water initially at a pressure of 100 kPa. The mass of the mixture is 5 kg, but only 75.6 % of the total mass is liquid. An electric resistance heater is turned on within the tank until ..

Fourth-order polynomial passes through the five points : A fourth-order polynomial passes through the five points for which the independent and dependent variables, x and y, respectfully, are given (-2,37), (-1,7), (0,5),(1,13), and (2,61). Find the polynomial by any suitable method. Here, x represents the..

Determine the mass flow rate through the nozzle : Air enters a nozzle steadily at 2.21 kg/m^3 and 30 m/s and leaves at 0.762 kg/m^3 and 180 m/s. If the inlet area of the nozzle is 80 cm^2 determine a) The mass flow rate through the nozzle and b) The exit area of the nozzle.

Constant-volume process and pressure process : A piston-cylinder assembly contains 3 lb of water initially at 95 psi and 350 F. The water undergoes 2 processes in a series. First a constant pressure process and then a constant-volume process. At the end of the constant volume process the temperat..

Determine the change in kinetic energy : Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4MPa. 500 degree Celsius and 80m/s and the exit conditions are 30kPa, 92 percent quality and 50m/s. the mass flow rate of the steam is 12kg/s. determine the chan..

Two-dimensional steady-state heat conduction : Using Finite Difference and Finite Element to Solve for Two-Dimensional Steady-State Heat Conduction. Temperature distribution in the block (provide color contour diagrams) Temperature distribution along the top surface (present T vs x graphs)

Tubular body for high-pressure coolant and a carbide tip : What drill has one set of flutes that are ground to more than one diameter? What drill category includes more than one set of flutes allowing multiple diameters? What drill type incorporates a tubular body for high-pressure coolant and a carbide tip?

Refrigeration cycle operating : A refrigeration cycle operating between two reservoirs receives energy QC from a cold reservoir at TC = 280 K and rejects energy QH to a hot reservoir TH = 330 K. For each of the following cases determine whether the cycle operates reversibly, irreve..

User Account

All Pages