Consider the mass and pulley system shown

Assignment Help Mechanical Engineering

Reference no: EM13717608

Consider the mass and pulley system shown. Mass m1 = 33kg and mass m2 = 13kg . The angle of the inclined plane is given, and the coefficient of kinetic friction between mass m2 and the inclined plane is Î¼k=0.19. Assume the pulleys are mass less and friction less. What is the acceleration of mass m2 on the inclined plane? Take positive acceleration to be up the ramp. If the system is released from rest, what is the speed of mass m2 after 3.5s ?When mass m2 moves a distance 3.52m up the ramp, how far downward does mass m1 move?

Reference no: EM13717608

Questions Cloud

Vibrometer has an undamped natural frequency : A vibrometer has an undamped natural frequency of 10Hz. and damped natural frequency of 8 Hz. Find the lowest frequency in the range to infinity at which the amplitude can be directly read from the vibrometer with less than 2 percent error.

Copper bulkhead at the entrance of a flow reactor : An 8" thick copper bulkhead (kept at 100 C by electrical heat) at the entrance of a flow reactor. The bulkhead is penetrated by a multitude of 0.25" diameter by 8" long cylindrical openings. The heated copper bulkhead is attached to 17" of excellent ..

Determine for the steam exiting the tank-mass flow rate : Three return steam lines in a chemical processing plant enter a collection tank operating at steady state at 1 bar. Steam enters inlet 1 with flow rate of 0.8 kg/s at 200 C. Steam enters inlet 3 with flow rate of 1.2 kg/s at 95 C. Steam exits the tan..

Find the final pressure and volume : Ammonia at 10ºC and mass 10 kg is in a piston cylinder with an initial volume of 1 m3. The piston initially resting on the stops has a mass such that a pressure of 900 kPa will float it. Now the ammonia is slowly heated to 50ºC. Find the final pressu..

Consider the mass and pulley system shown : Consider the mass and pulley system shown. Mass m1 = 33kg and mass m2 = 13kg . The angle of the inclined plane is given, and the coefficient of kinetic friction between mass m2 and the inclined plane is Î¼k=0.19.

Solve the equations of motion using rectangular coordinates : To set up and solve the equations of motion using rectangular coordinates. The 3-kg collar shown has a coefficient of kinetic friction Î¼k=0.205 with the shaft. The spring is unscratched when s=0 and the collar is given an initial velocity of v0=15.1..

Calculate the initial rate of cooling : A 0.025 m thick flat plate having a 20 cm X 20 cm cross section is made of plain carbon steel (k=30 W/mC), alpha=32.7 x10^-7m^2/s). The initial plate temperature is 727C. it is cooled by blowing 27C air over the top surface of the plate at 30 m/s; th..

The dry air mass flow rate entering the mixing chamber : Hot, moist outside air passes over a cooling coil, from which it exits in a saturated state at p=14.7lbf/in^2 and T=65F. The air is then mixed adiabatically with room air at p=14.7lbf/in^2, T=75F, phi=25%.

For a control volume enclosing the heat exchanger : Saturated water vapor at 100 kPa enters a counter flow heat exchanger operating at steady state and exits at 20C with a negligible change in pressure. Ambient air at 275 K, 1 atm enters in a separate stream and exits at 290 K, 1 atm.

User Account

All Pages