Confirm that the pressure vessel will leak before burst

Assignment Help Mechanical Engineering

Reference no: EM13627866

"Leak before break" (LBB) means that the crack must be able to grow through the wall thickness before unstable rupture of pressure vessel. An engineer tries to design a pressure vessel that is capable of withstanding a static pressure and that will "leak-before-break". The required material has a fracture toughness of and a yield strength of 586 MPa. The diameter of the vessel is specified to be 1.2 m with a wall thickness of 12.5 mm. A crack with surface length of 15 mm can reliably be detected.

(1) Confirm that the pressure vessel will leak before burst when the surface length of the crack is smaller than this size by calculating the maximum size of the surface crack that can develop and still maintain the LBB criteria.

(2) Explain briefly the importance of the precision of surface crack detection using LBB criterion.

Reference no: EM13627866

Questions Cloud

Cell biology explain how facilitated diffusion presents : explain how facilitated diffusion presents similarities with enzymatic chemical reactions. ltbrgtqn2 how does the

The refrigerant leaves the tube at 100 kpa and 20 degree c : refrigerant r-134a enters a 1 cm constant diameter tube at 400 kpa and 30 degree c. the refrigerant leaves the tube at

What is the direction of current through the smaller loop : two circular loops are centered on the x-axis parallel to the yz-plane. the smaller loop is stationary with radius r

The system is then heated while the pressure is held : consider a piston-cylinder system containing 0.1 kg of water. initially the volume of the system is 0.0125 m3 while the

Confirm that the pressure vessel will leak before burst : leak before break lbb means that the crack must be able to grow through the wall thickness before unstable rupture of

Assuming no heat is lost to the surroundings and neglibible : consider a 50.0 g ice cube placed in a container containing 200 g of water. the water is initially at 25.0 c and the

A large wrecking ball is held in place by two light steel : a large wrecking ball is held in place by two light steel cables. if the tension ta in the horizontal cable is 600 n

A 12-mm-diameter specimen is subjected to tensile loading : a 12-mm-diameter specimen is subjected to tensile loading. the increase in length resulting from a load of 9 kn is

A machine produces 1000 rubber 0rings per hour each ring : a machine produces 1000 rubber 0rings per hour. each ring has a .9 probability of meeting a thickness specification.a

User Account

All Pages