Concentration of each ion in the original solutions

Assignment Help Chemistry
Reference no: EM131949161

Adding 10.0 mL of a dilute solution of zinc nitrate to 246 mL of 2.00 M sodium sulfide produced 0.279 g of a precipitate.

What was the concentration of each ion in the original solutions?

What is the concentration of the sulfide ion in solution after the precipitation reaction, assuming no further reaction?

Reference no: EM131949161

Questions Cloud

What is the ph of the resulting solution : If 0.0315 moles of perchloric acid are added to 250 mL of this buffer, what is the pH of the resulting solution?
What basic principles allow fourier analysis to work : What basic principles allow Fourier analysis to work? What is the purpose of Fourier analysis? What do we gain by performing Fourier analysis?
How many miles of hpo4 2- were delivered : A maintenance solution IV fluid contains 30 Eq of HPO4 2- per liter of solution. If a patient receives 2350 mL of the IV solution, how many miles of HPO4 2
How would effectiveness of proposed intervention be tested : Provide a general description of the proposed internet intervention. How would the effectiveness of the proposed intervention be tested?
Concentration of each ion in the original solutions : Adding 10.0 mL of a dilute solution of zinc nitrate to 246 mL of 2.00 M sodium sulfide produced 0.279 g of a precipitate.
Rate constant for the reaction : For a zero order reaction which has an initial concentration of 0.500 M for the reactant, what is the concentration after 45.0 seconds?
Discharge reaction for a lithium-iron disulfide : (a) The discharge reaction for a lithium-iron disulfide battery can be represented as:
Describe the methodology of the proposed study : Described the methodology of the proposed study including the age range of the participants, and participant variables such as: 1) age, 2) gender.
Determining the radioactive decay : How many milligrams of a 77.9 milligram sample of thallium-201 will be lost by radioactive decay during 365 hours?

Reviews

Write a Review

Chemistry Questions & Answers

  How many ml of his naoh solution are required

Problem- If 25.00 mL of a 0.1301 M solution of a diprotic acid H2A are titrated with 0.1500 M NaOH, how many mL of his NaOH solution are required to completely neutralize this acid solution. Assume that all the protons in the acid can be neutraliz..

  Find out the power to drive the pump

A feed water pump operates with a flow rate of 350 kg/s. The water enters at 420K. The inlet pressure is 0.7 MPa and the outlet pressure is 20 MPa. Find out the power to drive the pump if the pump isentropic efficiency is 87%. As well determine th..

  The volume of an ideal gas is held constant determine the

the volume of an ideal gas is held constant. determine the ratio p2p1 of the final pressure to the initial pressure

  Oxidation and reduction half reaction

Problem- Oxidation and reduction half reaction and the balanced overall redox reactions for the following reactions

  Explain van der waals constants can be found

Van der Waals constants can be found here. Use the ideal gas equation to calculate the pressure under the same conditions

  Interfacial tension of the solid liquid interface change

A nonelectrolyte solution adsorbs on an electrically neutral solid through a liquid. Two surfaces of this type are brought close to one another in the liquid such that they interact.

  Explain vinyloxirane reacts with lithium dibutylcuprate

When the epoxide 2-vinyloxirane reacts with lithium dibutylcuprate, followed by protonolysis, a compound A is the major product formed. Oxidation of A with PCC yields B, a compound that gives a positive Tollens test and has an intense UV absorptio..

  Define what is the molecular weight of the unknown acid

if 30.15 ml of 0.0995 M naoh is required to neutralize 0.216 g of an unknown acid, HA, what is the molecular weight of the unknown acid

  Explain the specific heat of a certain type of cooking oil

The specific heat of a certain type of cooking oil is 1.75 J/(g·°C). How much heat energy is needed to raise the temperature of 2.69 kg of this oil from 23 °C to 191 °C

  State the equations showing the successive dissociations

1. H2CO3 (carbonic acid) is a polyatomic acid. State the equations showing the successive dissociations. 2. For a 0.6M NH41+ solution, compute H+, pH, and [OH-].

  What is the concentration of nitric acid

A 20.00 mL sample of 0.1015 M nitric acid is introduced into a flask, and water is added until the volume of the solution reaches 250.00 mL. What is the concentration of nitric acid in the final solution?

  Calculate the molar mass of the metal

Write the molecular, total ionic, and net ionic equations for the reaction and calculate the molar mass of the metal and identify the element.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd