Compute the work done by the gas for constant pressure

Reference no: EM13545626

Two pounds of an ideal gas are contained within a piston-cylinder arrangement. The initial volume and pressure are 1 ft3 and 75 psia respectively. The final volume is 3 ft3. compute the work done by the gas for the following processes:

(a) constant pressure,

(b) constant temperature.

Reference no: EM13545626

Questions Cloud

Determine the design load for strength and serviceability : Determine the design load for strength and serviceability limit states (short-term and long term), for a steel beam in a residential building with the following data;

Determine the runoff rate from a two storm system if the : Determine the runoff rate at t = 15.0 hr from a two storm system if the first storm drops 2.0-inches starting at t = 0, and the second storm drops 5.0-incheds starting at t = 12.0 hrs.

Compute the unit weight dry unit weight degree of saturation : Find the live load capacity, Pl of a beam with f prime c=4 ksi, fy=60 ksi, Wd=self weight, beam width b=18 inches, beam height h=24 inches, effective depth=21 inches, concrete unit weight=150 pcf, steel As=3-#9 bars.

Calculate the respective thickness of the soild phase : An investigation of a particular site revealed a 4m thick deposit of peat overlying a deposit of soft clay .A 150 mm diameter by 300 mm long sample taken from the peat deposit was weighed and found to have a total mass of 5036 g and after oven-drying..

Compute the work done by the gas for constant pressure : Two pounds of an ideal gas are contained within a piston-cylinder arrangement. The initial volume and pressure are 1 ft3 and 75 psia respectively. The final volume is 3 ft3.

What is the estimated collection efficiency to improve its : Our ESP is collecting 95% of the particles in our exhaust stream. We are under pressure to improve its performance. It has been suggested that if we were to cool the inlet gas from the present 600°F to 250°F, the performance would improve

Calculate head supplied by the pump draw hgl and egl for : Water from a lower reservoir (water surface elevation) 500 m is pumping to the upper reservoir (water surface elevation 600 m) through a 5000 m long straight pipe with 0.5 m diameter.

Determine the rate at which heat must be transferred to the : Saturated liquid water at 1.0 MPa is throttled adiabatically to a pressure of 0.4 MPa. If the change is kinetic energy is negligible, what percentage of the water evaporates during this throttling process?

What is the local loss coefficient of the basket strainer : A basket strainer is installed in a 15-cm diameter pipe. Pressure gauges are installed immediately upstream and downstream of the basket strainer. When water flows at 100 m3/hr, the pressure gauge immediately upstream of the basket strainer measures ..

User Account

All Pages