Compute the strains and the stresses

Assignment Help Other Engineering
Reference no: EM131358521

Re-compute Exercise 1 for loading beyond first ply failure (FPF). Simulate the damaged material by using a damage factor d = 0.999 (ply discount). The minimum value of strength ratio R thus obtained corresponds to the last ply failure (LPF), i.e., RLP F.

Exercise 1

Using the stresses found in Exercise 2, evaluate the strength ratio RF P F on top and bottom of each lamina using the following failure criteria:

(a) Interacting criterion,

(b) Maximum strain criterion, and

(c) Maximum stress criterion.

In each case, the minimum of the values of R computed through the thickness corresponds to the first ply failure (FPF) strength ratio. Note that the FPF values computed with the various criteria are, in general, different from each other. Only experience or multiaxial strength test data can tell which criterion is the best for a particular material and stress state.

Exercise 2

Using the results for the intact laminate in Exercise 3, compute:

(a) the strains εx, εy, γxy at the interface between laminae,

(b) the stresses σx, σy, τxy on all laminae, right next to the interface,

(c) the strains ε1, ε2, γ6 by using the transformation equations,

(d) the stresses in material coordinates σ1, σ2, σ6.

Exercise 3

Consider a [0/45/-45]S laminate, subject to a load Nx = N= 1000 N/mm. Compute the [A], and [D] matrices (neglect shear deformations) for the intact laminate. Each lamina is 2.5 mm thick. Do not adjust for in-situ strength. The material properties are:

E1= 204.6 GPa

E2 = 20.46 GPa

G12 = 6.89 MPa

v12 = 0.3

F1t = 826.8 MPa

F1c = 482.3 MPa

F2t = F2c= 68.9 MPa

F6 = 241.15 MPA

Reference no: EM131358521

Questions Cloud

Hedge strategy might the bank utilize to manage this risk : Key Wesr bank has been making a high volume (150m) of 30 year fixed rate mortgage loans at 4%. The bank is worried about rising rates and the impact on the net incoe and net worth of the bank. If rates rise 100 basis points how much interest income w..
Effectiveness of the perceived listening : Re-watch your movie then select a 10 minute scene and evaluate the listening techniques of the main characters. Point out the good listening techniques from the book, and assess the effectiveness of the perceived listening. Describe the following:
Develop a presentation on the branding strategy : This assignment is designed to help teams understand the interrelationships between brand strategy and the communication message to the target audience. It is a continuation of the group marketing plan and students should review the Learning Team ..
Compute the present value of this annuity one year from now : The term structure is defined by st 0.05 0,005t, for t 1,2,3 A three- year annuity-immediate will be issued one year from now with annual payments of 1000. Using the appropriate forward rates, compute the present value of this annuity one year from n..
Compute the strains and the stresses : Compute the strains εx, εy, γxy at the interface between laminae,- the stresses σx, σy, τxy on all laminae, right next to the interface.
Begin paying dividends-beginning with dividend : Computech Corporation is expanding rapidly and currently needs to retain all of its earnings; hence, it does not pay dividends. However, investors expect Computech to begin paying dividends, beginning with a dividend of $0.75 coming 3 years from toda..
Create a short presentation describing elements : LEVEL ONE: Pick a movie and watch it, then using PowerPoint create a short presentation describing elements which you learned from this week's lesson:
Direction of the effect by selecting increase-decrease : If a firm has retained earnings of $3.7 million, a common shares account of $5.7 million, and additional paid-in capital of $11.4 million, how would these accounts change in response to a 10 percent stock dividend? Indicate the direction of the effec..
Investment program satisfy the conditions for immunization : A company owes $ 10000 to be paid at times 2, 4, and 6. The company plans to meet the obligation with an investment program that produces asset cash flows of X at time 1 and Y at time 5. The effective rate of interest is 10%. Does this investment pro..

Reviews

Write a Review

Other Engineering Questions & Answers

  Double the thermal efficiency

A Carnot heat engine is operating between a source at TH and a sink at TL. If it is desired to double the thermal efficiency of this engine, what should the new source temperature be? Assume the sink temperature is held constant.

  What is the elevation of the curve at station

The station of the PVI is 233 + 40 with elevation 1203 ft. What is the elevation of the curve at station 234 + 00?

  What is the pressure drop in the 4-ft-diameter pipe

If the 6-in.-pipe in has a pressure drop of 0.2 psi in a given length, what is the pressure drop in the 4-ft-diameter pipe in a length that is 1000 times that of the smaller pipe?

  The current with respect to the voltage

Questions 1 to 25: Select the best answer to each question. Note that a question and its answers may be split across a page break, so be sure that you have seen the entire question and all the answers before choosing an answer.

  Find required value of compensating miller capacitance

Assume that the op amp incorporates an amplifier equivalent to that in Fig. 11.40, with C1 = 150 pF, C2 = 5 pF, and gm = 40 mA/V, and that fP1 is caused by the input circuit and fP2 by the output circuit of this amplifier. Find the required value..

  Variability of laboratory measured properties of category

Compare variability of laboratory measured properties of category 2 soil material for   a range of overburden pressure scenarios.

  Determine the length ratios and shear stress ratio

Determine the required model sediment sizes, the length ratios, the water discharge per unit width ratio, and the shear stress ratio.

  Find the maximum clearing time necessary

Find the maximum clearing time necessary for recloser operation - find the minimum recloser clearing time. Assume that the recloser operating time

  Evaluate the stability using rouths hurwartz criterion

Evaluate the stability using Rouths Hurwartz criterion and obtain the range of K value for the stability under various controllers and evaluate the relative stability of the system with P and I controllers.

  Assignment on csci 620

Your diagrams have to be detailed and well explained. The case study is open ended, so you will have to make assumptions and consistently use them throughout the entire paper.

  Op-amp theory discussion

Question A: Discuss methods that analog signal designers can utilize to manage noise imposed on signals.

  Difference between digital immigrants and digital natives

Describe at least three ways in which digitization has changed the manner in which society consumes information - Which of the following statements best describes the main difference between digital immigrants and digital natives?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd