Compute the required layout distance if the temperature

Assignment Help Civil Engineering

Reference no: EM13548170

1.Compute the required layout distance if the Temperature is 13 degrees celcius, Tape Length is 29.990 m, and the required Layout distance is 500.000 m.

2.Compute the corrected horizontal distance if Temperature is 100 degrees farenheit, Tape Length is 100.03 ft, Slope is at -0.80%, Slope Measurement is 298.70 ft.

3.A 30-m tape has a mass of 544 g and is supported only at the ends with a force of 80 N. what is the sag correction?.

4.A distance of 72.55 ft is recorded using a steel tape weighing 0.016 lb per foot. The tapes is supported only at the ends with a tension of 15 lb. Find the distance corrected for sag.

Reference no: EM13548170

Questions Cloud

How far from existing station mark on first street would : The point of intersection of the centerline of Elm Road with the centerline of first Street was originally recorded (using a 30-m steel tape) as being at 6 + 71.225. How far from existing sation mark 5 + 00 on first street would a surveyor have to

Write a vba function that receives a gauge pressure : A 50-m tape is used to measure between two points. The average weight of the tape per meter is 0.320 N. If the measured distance is 48.888 m, with the tape supported at the ends only and with a tension of 100 N, Find the corrected distance.

What horsepower must be supplied to the pump in order : A pump of 80% efficiency lifts water from one large open tank to another; the difference in water surface elevations is 20 feet. The pipe is relatively smooth (f = 0.0122), and has 3 elbows, each with a loss coefficient of 2/3.

Determine the prism constant : To verify the constant of a particular prism, a straight line EFG is laid out. The EDM instrument is first set up at E, with the following measurements recorded: EG = 426.224 m, EF = 277.301 m

Compute the required layout distance if the temperature : A distance of 72.55 ft is recorded using a steel tape weighing 0.016 lb per foot. The tapes is supported only at the ends with a tension of 15 lb. Find the distance corrected for sag.

The pipe entrance is flush and square edged : Water flows through 800 feet of 12-inch diameter iron pipe (? = 0.0018 inches) between 2 open storage tanks, whose water surface elevation difference is 16 feet. The pipe entrance is flush and square edged

Determine the force in each member : The truss shown consists of 9 members and is supported by a ball and socket at A, two short links at B, and one short link at G. Check that this truss is a simple truss, that it is completely constrained

Determine the coefficient of statics friction between : A hawser is wrapped two full times around a bollard. by exerting an 80 pound force on the free end of the hawser a dockworker can resist a force of 5000 on the other end of the hawser.

Compute the value of pb in atm when h=10 m and density : A large closed tank is pressurized as shown. A jet of fluid issues from a small hole. Assume the flow is incompressible, irrotational, quasi-steady and the only body force acting is gravity.

User Account

All Pages