Compute the peak current, When an AC source is connected

Compute the peak current

Assignment Help Physics

Reference no: EM13679941

When an AC source is connected across a 18.0 Ω resistor, the output voltage is given by deltaV = (130 V)sin(70PiT).

(a) Compute the maximum voltage.

(b) Compute the rms voltage.

(d) Compute the peak current.

(e) Determine the current when t = 0.0045 sec.

Reference no: EM13679941

Questions Cloud

Evaluate the power loss due to resistance in the line : A high-voltage transmission line with a resistance of 0.285 ohm/km carries a current of 1.30 kA. Find the power loss due to resistance in the line

Determine what is the speed of the ice : A 10 kilogram block of ice slides down a frictionless ramp that goes from a ledge 10 meter above the ground to the ground. Determine what is the speed of the ice by the time it gets to the ground

Find what power will it draw when first switched on : Nichrome wire is used in some radiative heaters. Find what power will it draw when first switched on

Obtain the speed of block when it leaves the spring : A block of mass 1.40 kilogram is attached to a spring and sits on a frictionless table which is a height h=4 meter above the floor. obtain the speed of block when it leaves the spring

Compute the peak current : When an AC source is connected across a 18.0 Ω resistor, the output voltage is given by deltaV = (130 V)sin(70PiT). Compute the peak current

Compute the resulting current in the wire : A 34.7 meter long aluminum wire at a temperature of 24.3oC has a radius of 0.295 millimeter. If the wire is heated to 73.8oC and the 19.2 Volts potential difference is maintained, compute the resulting current in the wire

Find what is the radius of the turn in meters : An airplane travelling at 150 meter per second due west turns around thus it is going due east. Find what is the radius of the turn in meters

Evaluate what must be the tension in wire : Two wires are anchored at both ends. Wire 1 has a mass of 85 g and a length of 5.2 m. Evaluate what must be the tension in Wire 1 if its third harmonic is to equal the first overtone of Wire 2

Compute what the rms voltage across the resistor : An AC voltage source is connected to a resistor R = 1.45 x 102 ohm. Compute the rms voltage across the resistor

User Account

All Pages