Compute the money saved in one month by using cfl bulb

Assignment Help Electrical Engineering
Reference no: EM13266070

compute the money saved in one month by using CFL (compact fluorescent light) bulb (18 W) instead of using an incandescent lamp (60 W) if the cost of electricity is $.12 per kWh. Assume lights are used for 10 hours a day. (30 days in the month)

Reference no: EM13266070

Questions Cloud

Determine the value of brewsters angle : A light beam is incident on a piece of zircon (n = 1.923) at the Brewster's angle. determine the value of Brewster's angle
Find ratio of co2 emission when power comes from wind farms : If the emission, factor of producing electric power by PV cells is 100 g of CO2 per kWh, by wind power is 15 g of CO2 per kWh, and by coal is 1000 g of CO2 per kWh, then find the ratio of CO2 emission when a) 15% of power comes from wind farms
Should it replace the old steamer : What is the NPV of the project? Round your answer to the nearest dollar.
What are the discount yield and the true annual yield : What are the discount yield and the true annual yield on a six-month, $10,000 Treasury bill purchased for $9,589?
Compute the money saved in one month by using cfl bulb : compute the money saved in one month by using CFL (compact fluorescent light) bulb (18 W) instead of using an incandescent lamp (60 W) if the cost of electricity is $.12 per kWh. Assume lights are used for 10 hours a day. (30 days in the month)
What is the difference in path lengths : In a Young's double-slit experiment, a set of parallel slits with a separation of 0.102 mm is illuminated by light having a wavelength of 585 nm, What is the difference in path lengths from the two slits to the location of a fifth order bright frin..
Find if impulse response of system is absolutely integrable : The steady-state response is due to simple poles in the j axis of the s-plane coming from the input. Suppose the transfer function of the system is: H(s)=Y(s)/X(s)= 1 / (s+1)^2 + 4 a. Find the poles and zeros of H(s) and plot them in the s-plane.
What is the value of this endowment in today dollars : The first $4M will start today; at the end of 5 years, the hospital will also receive a lump sum payment of $18M. Assuming the cost of money is 3%, what is the value of this endowment in today's dollars?
What is the magnitude of the downward force : To balance a very light rod when a down force is applied at a point 0.77m to the left of a supporting fulcrum (pivot point), What is the magnitude of the downward force

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine the magnitude of the armature current

A 440-V three-hase Y-connected synchronous motor has a synchronous reactance of 1.5 ohms per phase. The field current has been adjusted so that the torque angle is 28 degrees when the supplied power to the motor is 90kW.

  What is the voltage of that point-relative to ground

If the resistance path from the wall outlet end of the neutral wire to ground is 23ohm. what is the voltage of that point (relative to ground) if a 26 W compact fluorescent bulb is connected to the outlet

  What is the power delivered to r at the critical frequency

C=1000 pF R=10 kohms a. Determine A = Vo/Vi at f = fc for the high-pass filter. b. Determine A = Vo/Vi at two octaves above fc. Is the rise in Vo significant from the f = fc level

  Calculate the gain of an inverting amplifier with rs

Calculate the gain of an inverting amplifier with Rs = 100kO and Rf = 500kO. Assume the op amp is ideal. Calculate the gain of an inverting amplifier with Rs = 100kO and Rf = 500kO.

  What data type you would use for temperature

Indicate what data type you would use for the following variables: (a) the temperature (b) the number of days in a week (c) the number of days in a year (d) the number of months in a year

  Determine the resistance r and how are r and c related

To discharge a capacitor of 1mF charged with a voltage of 1 volt we connect it, at time t=0, with a resistor of R-ohm. When we measure the voltage in the resistor we find it to be v_R (t)=e^(-t) u(t). Determine the resistance R.

  What would happen to the current in a circuit

(1) If the frequency was changed, what would happen to the current in a circuit  Explain increase or decrease. (2) If you have R = 2 K ohm, Xc = 3 K ohm, XI = 4 K ohm . Find the G, Bc, BI, Yt anf Zt.

  When to replace zener shunt regulator with an appropriate ic

Desired D.C. Output : 10 V Load Variation: 0.3 kilo-ohms - 10 kilo-ohms Ripple Factor: Less than 0.1% for 2 kilo-ohms load Load Regulation: Better than 3 mV for a 1 mA change in load current

  Explain why the short-circuit method for determining

Explain why the short-circuit method for determining the Thevenin resistance of a circuit cannot be applied if the circuit does not contain any independent current or voltage sources.

  Write a program in a script file that creates a n-m matrix

The value of the element in the first column is the number of the row. The rest of the elements are equal to the sum of the element above them and the element to the left. When executed, the program asks the user to enter values for n and m.

  Find and print out the average of the scores

Write a program that will read scores into an array. The size of the array should be input by the user (dynamic array). The program will find and print out the average of the scores. It will also call a function that will sort the scores in ascendi..

  Find interconnection between roms address and data lines

Reduce the two functions given below and implement them using fewest 8x2 ROM's. Draw a neat labeled diagram showing interconnection between the ROM's address and data lines, and content of each ROM.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd