Compute the molar mass of the noble gas

Reference no: EM13320070

An unknown noble gas effuses through a tiny hole into an evacuated space with a rate that is 0.578 times the rate of N2(g): rateunk/raten2=0.578. calculate the molar mass of the noble gas in g/mol using Gtaham's law of effusion (N=14.0)?

Reference no: EM13320070

Questions Cloud

Design a one way slab to support a uniform live load : Design a one way slab to support a uniform live load of 300 psf. The beam is simply supported with a span of 20 ft. Use a reinforcement ration ( Ps) of 0.008 Use f'c=3000 psi and fy=60000 psi.

Determine the energy loss due to the gradual enlargement : Determine the energy loss due to the gradual enlargement from a 25 mm pipe to a 75 mm pipe when the velocity of flow is 3 m/s in the smaller pipe and the cone angle of enlargement is 20°C.

What is the capacitive time constant of this combination : A 8000 %u03A9 resistor is joined in series with a 10 %u03BCF capacitor. What is the capacitive time constant of this combination

Determine the channel slope s under the assumption : For a triangular channel of z=2 side slopes tha tcarries a discharge of 100 cfs at a depth of 5 ft, determine the channel slope S under the assumption that normal flow exists and that n equals 0.022.

Compute the molar mass of the noble gas : An unknown noble gas effuses through a tiny hole into an evacuated space with a rate that is 0.578 times the rate of N2(g): rateunk/raten2=0.578. calculate the molar mass of the noble gas in g/mol using Gtaham's law of effusion (N=14.0)

Determine the size of the watershed in acres for watershed : The 1-hr UH in the table was recorded for a particular watershed. Determine the size of the watershed in acres and then convert the 1-hr UH into a 3-hr UH for the watershed.

What is the yield to maturity : 2. You purchase a bond for $875. It pays $80 a year (that is, the semiannual coupon is 4%), and the bond matures after 10 years. What is the yield to maturity?

Calculate the torque created by mass : A stick with a length of 1m is supported by a knife edge at the 50 cm mark (middle). Two masses m1: 0.4 kg and m2: 0.6 kg are hanging.. m1 20 cm from the left end, Calculate the torque created by m1

Determine the normal depth using a converging iteration : A 5-m wide rectangular channel is carrying a flow of 5 cubic meter per second. If the Manning n=0.013 and the bottom slope, So=0.0001, determine the normal depth using a converging iteration.

User Account

All Pages