Compute the maximum fiber stress

Reference no: EM13545633

An S 12x40.8 of A36 steel in a building is supported as a simple beam having a span equal to 17ft 6in. and carries a uniform load equal to 1.60 klf, which includes the weight of the beam over the entire span.

A) Compute the maximum fiber stress.

B) If the compression flange of the beam is supported laterally only at the ends of the span, what will be the allowable compressive stress in the extreme fibers?

Reference no: EM13545633

Questions Cloud

What is the minimum radius that can be cleared : A two lane hwy with 12' lanes is to be reconstructed to a design speed of 50 mph. Due to right of way restrictions, the largest distance that can be cleared from the edge of the road is 10'. What is the min. radius?

What is the tensile force on the weld per foot : Due to a leak in Pump Station 1,the Alaska pipeline is shut down briefly.The pipe line is half full.Assume the pipe is welded horizontally at its midpoint.What is the tensile force on the weld per foot? Assume Ø=40”and ?oil=53.55lb/ft3.

The average return period of the median value : The probability that, for a 2-year period, the peak flow rate will equal or exceed the median value in the second year, but not in the first year?

What happens after the memory is full : Assuming approximately 19,296 data points can be held in memory, with a 21X Datalogger (CR23X Micrologger), capturing battery voltage; panel temperature

Compute the maximum fiber stress : An S 12x40.8 of A36 steel in a building is supported as a simple beam having a span equal to 17ft 6in. and carries a uniform load equal to 1.60 klf, which includes the weight of the beam over the entire span.

What is the probability that the probability if the flow : You are provided that a 33-year record of peak annual flow rates was subjected to a frequency analysis. You are interested in the median value. Thus, for part (a), what is the probability that the probability if the flow rate exceeds the median value..

Determine the elongation of the cable elongation : A homogeneus cable of a lenght L and uniform cross section is suspended from one end. A. denoting by p the density (mass per unit volume) of the cable and by e its modulus of elasticity. determine the elongation of the cable

Determine the design load for strength and serviceability : Determine the design load for strength and serviceability limit states (short-term and long term), for a steel beam in a residential building with the following data;

Determine the runoff rate from a two storm system if the : Determine the runoff rate at t = 15.0 hr from a two storm system if the first storm drops 2.0-inches starting at t = 0, and the second storm drops 5.0-incheds starting at t = 12.0 hrs.

User Account

All Pages