Compute the geodetic coordinates of the station qbn from

Assignment Help Civil Engineering
Reference no: EM13536822

1.Compute the geodetic coordinates of the station QBN from station MDU If coordinates of station MDU are f = 39°51'55"N, ? = 104°40'58"W Distance = 30km, Az = 243°40'48”, h = 1850m, dh= -20. Ellipsoid GRS80

2.Some hypothetical alloy is composed of 12.5 wt% of metal A and 87.5 wt% of metal B. If the densities of metals A and B are 4.27 and 6.35 g/cm3, respectively, whereas their respective atomic weights are 61.4 and 125.7 g/mol, determine whether the crystal structure for this alloy is simple cubic, face-centered cubic, or body-centered cubic. Assume a unit cell edge length of 0.395 nm.

Reference no: EM13536822

Questions Cloud

Organizations create value and influence stakeholders : Describe and explain how organizations create value and influence stakeholders? What is the role of entrepreneurship in this process?
Using relevant analytical frameworks critically : Using relevant analytical frameworks critically analyse the strategic capability of Facebook...
Determine m and b : The following points are taken from data that is known to be of the form y = bx^m
What sort of international orientation does it have : What sort of international orientation does it have?
Compute the geodetic coordinates of the station qbn from : Compute the geodetic coordinates of the station QBN from station MDU If coordinates of station MDU are f = 39°51'55"N, ? = 104°40'58"W Distance = 30km, Az = 243°40'48”, h = 1850m, dh= -20. Ellipsoid GRS80
Acquisition practices of the company : Focus your analysis on the procurement or acquisition practices of the company
Determine the maximum speed of the block in the subsequent : A block of mass m is attached to two springs as shown. Knowing that in each case the block is pulled through a distance x from it's equilibrium postition and released, determine the maximum speed of the block in the subsequent motion.
Determine the mass distribution : If metal sorption to algae can be modeled by a Langmuir isotherm, determine the mass distribution (sorbed vs dissolved) of lead in the marsh.
Aggregate planning for a bottling company : Aggregate Planning for a Bottling Company

Reviews

Write a Review

Civil Engineering Questions & Answers

  How much excess pore water pressure would need to develop

The vertical effective stress at a certain point in a loose sand is 1000lb/ft^2. If an earth quake were to occur, how much excess pore water pressure would need to develop at this point for liquefaction to occur

  How large must the lagoon be to achieve a concentration

A completely mixed aerated lagoon (batch reactor) is to be used. How large must hte lagoon be to achieve a concentration of effluent that is 50 mg/L

  What is the wavelength of the electromagnetic radiation

You heat 250 ml of tap water from 10 degree celcius to 100 degree celcius in 2 minutes using a microwave oven operating at 2.5 GHz. a). What is the wavelength of this electromagnetic radiation

  Compute azimuth of line pc to point p and chord distance

Given the stationing in meters as (4+56) for the PC of a horizontal curve of radius R=1200 meters and angle I=22°. The azimuth of the line PC to PI as AzPC-PI = 155° 30'. A point P is to be located on the curve at stationing of 7+00.

  Define is the plant in violation of the discharge limit

At a distance of 20 km downstream of the plant, the river has an ultimate CBOD of 10 mg/L. The state has set an ultimate CBOD discharge limit for the treatment plant of 2000 kg/day.

  What removal percentage should be expected for particles

A treatment plant has a horizontal flow sedimentation tank with a depth of 4m, width of 6m, length of 36m, and process flow rate of 450m3/h. What removal percentage should be expected for particles that have settling velocities of 1.0 m/h and 2.5 ..

  Determine the pressure which is acting at head and at toes

Shaquille O Neal, who is listed as 7`1" tall is out of the NBA Playoffs and so has time to visit is pool. If he stands vertically in the water, completely submerged

  How many pounds of sulphur would be emitted from coal-fired

How many pounds of sulphur would be emitted from coal-fired power plants in the united states in 3 years. (each year. U.S electricity production in about 0.28 x 1012 watts, and coal has an energy content of about 30 x 106 J/kg

  Determine how large must lagoon be to achieve concentration

A dye mill has a highly coloured wastewater with a flow of 32 million L/day. One suggestion has been to use biological measn to treat the watewater and remove the colour, so a pilot study is performed.

  Which the trailing vortices move downward under their own

An airplane with a weight of 10,000lb/f is flying at 600ft/s at36,000ft., where the airplane pressure is 3.3 p.s.i.a. and thetemperature is -67 degrees F. The lift coefficient is 0.2. The spanof the wing is 54 ft. Calculate the wing area and minimum ..

  How much was invested in each account

Suppose a person invests a total of $10,000 in two accounts. One account earns 8% annually, and the other earns 9% annually. If the total interests earned from both accounts in a year is $860, how much was invested in each account?

  Determine the height from the ground and the time at which

a two story school has interior columns that are spaced 15 ft apartin two perpendicular directions. If the loading on the flat roof isestimated to be 20 lb/ft^2 determine the reduced live loadsupported by a typical interior column at (a) the ground f..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd