Compute the elevations at 100-ft stations throughout the

Assignment Help Civil Engineering
Reference no: EM13528831

A 800 m vertical curve joins a -3% grade line to a 5% grade line. The PVI of the curve is at station 6200 and its elevation is 600.6 ft. Compute the elevations at 100-ft stations throughout the curve.

Reference no: EM13528831

Questions Cloud

Write the following iterated integral as a double integral : Write the following iterated integral as a double integral with aregion R, and use the change of variables to compute the integral:∫x=2x=0∫y=√(2x-x²)y=0√(x²+y²) dy dx
What is the nominal distance in miles between the sw corner : What is the nominal distance in miles between the SW corner ofSec. 2m T 6 S, R 5E, Indiam PM and the NW corner of Sec. 17, T 6 S,R 3 E, Indian PM?
Sketch clearly the velocity and shear stress profiles in : A film of newtonian liquid folws down the outside surface of avertical cylinder of radius R. the flow is steady, laminar and the thickness of the film is constant.
Determine the maximum fiber stress and the stress in a fiber : A simply supported beam, 2 inches wide by 4 inches high and 12 feetlong is subjected to a concentrated load of 2000 lb at a point 3 ftfrom one of the supports. Determine the maximum fiber stress and the stress in a fiber located 0.5 inches from the t..
Compute the elevations at 100-ft stations throughout the : A 800 m vertical curve joins a -3% grade line to a 5% grade line. The PVI of the curve is at station 6200 and its elevation is 600.6 ft. Compute the elevations at 100-ft stations throughout the curve.
Determine the torque needed to turn the impeller : A centrifugal pump is used to pump water from ariver. The absolute velocity V2 = 82ft/s is at an angle of 25 degrees to theradial direction. The impeller's thickness is of 1.2 in and r2= 0.86 ft and rotates at a speed of 1250 rpm.
What is the maximum pressure on the form in psf : What is the maximum pressure on the form in PSF?
If the desired flowrate is at least : Two reservoirs, which differ in surface elevation by 40m, areconnected by 350m of new pipe of diameter 8cm. If the desired flowrate is at least 500N/s of water at 20 degrees C. can the pipematerial be made of
What fraction of the flue gas stream can be bypassed around : A coal-fired power plant with an scrubber has an overall  removal efficiency of 85%. But rather than treat the entire stream to 85% removal

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find if vehicle is reasonable claim or a gross exageration

an average vehicle puts out nearly 20 lbm of carbon dioxide into the atmosphere for every gallon of gasoline it burns, thus one thing we can do to reduce global warming is to buy a vehicle with higher fuel economy.

  Estimate the runoff from the watershed into the lake

A 5 km2 lake does not have a defined input but receives runoff from its watershed (25 km2). The area receives 60 cm/yr in precipitation. Evaporation from the lake surface is 10 cm/yr with watershed evapotranspiration of 20 cm/yr.

  Determine void ratio and dry unit weight of compacted sample

A soil sample is prepared in the laboratory by mixing a certain amount of dry soil with 10.5 wt% water. The relative density of the grains of the material is equal to 2.7.

  Determine magnitude of acceleration when t-x and y are in ft

If the component of velocity along the axis is Vx=6t with t in seconds. determine the particle's distance from the oriigin which is at t=3s. when t=0, x=0, and y=0. also determine the magnitude of acceleration when t=3, x and y are in ft.

  Calculate the escalaed dollar irr for an escalated dollar

an investment of $80,000 is projected to generate escalated dollar net revenues (income minus costs) of $10,000 in year one, $30,000 in year 2 and $40,000 in year 3 with a $100,000 salvage value at the end of year

  Determine the mass nd specific volume of argon gas in vessel

Determine the mass and specific volume of argon gas in a vessel at 150 kPa and 20°C. The vessel is spherical, with radius 5 m.

  Determine the normal stress on the outside of the frame

A building frame is made with a 10" square steel box shape that has an area of 15 in^2 and a moment of inertia I =225 in^4. The frame consists of pinned supports at points A and F and an internal pin at point D.

  Find what volume of co would a 5-mile trip produce

What volume of CO would a 5-mile trip produce after the gas coolsto 25°C (at 1 atm) and per meter of distance traveled, what volume of air could be polluted to the air quality standard of 9ppm

  Find second year book value for equipment with initial cost

what is the second year book value for equipment with an initial cost of $11,000, a salvage value of 1,000 and a recovery period of 5 yrs for A. straight line depreciation. B. Double declining balance. C. MACRS

  Determine the maximum water table elevation

A canal was constructed running parallel to a river 1500 ft away. Both fully penetrate a sand aquifer with a hydraulic conductivity of 1.2 ft/d. The area is subject to rainfall of 1.8 ft/y and evaporation of 1.3 ft/y.

  Determine what would be the relative compaction in the field

The maximum and minimum dry unit weights of a sand were determined in the laboratory to be 104 lb/ft^3 and 93 lb/ft^3, respectively. what would be the relative compaction in the field if the relative density is 78%

  Describe what reorder point should jill use and why

Cartridges cost $120 each and require 2 weeks to obtain from the vendor. Jill uses (Q,r) policy to control inventory of cartridges. You can assume that there are 50 working weeks in a year.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd