Compute the discharge for a rectangular channel

Assignment Help Civil Engineering
Reference no: EM132416408

1. Compute the discharge for a rectangular channel that is 64.6ft (20m) wide, the flow depth is 4.8ft (1.5m), the channel is concrete lined, and the slope of the channel bed bed is 0.015 ft/ft(m/m.

2. Use Manning's equation to determine the average velocity of a stream if the roughness coefficient n is increased by weed growth from 0.03 to 0.05. Assume S and R do not change and the average velocity with a roughness coefficient of 0.03 is 6ft/s.

Reference no: EM132416408

Questions Cloud

Propose reagents and give the mechanisms : Give the products A to K, and the mechanisms of their formation, for the reactions in the schemes and Propose reagents, and give the mechanisms.
ENGR132 Transforming Ideas to Innovations Assignment : ENGR132 Transforming Ideas to Innovations Assignment Help - American University of the Middle East, Kuwait. Project - Solution to Reducing Carbon Emission
What is the porosity of the soil : How deep will 10 mm of rainfall saturate the soil? What is the porosity of the soil?
Possible saturated hydraulic conductivity combinations : Provide an example of aquifer and geologic properties that lend to one of the four possible saturated hydraulic conductivity combinations of heterogeneity
Compute the discharge for a rectangular channel : Compute the discharge for a rectangular channel that is 64.6ft (20m) wide, the flow depth is 4.8ft (1.5m), the channel is concrete lined, and the slope.
Value of a Business Analyst Assignment : Value of a Business Analyst Assignment Help and Solution - Colorado State University Homework Help - describe how a business analyst would bring value
Describe the two methods of stress grading : Describe the two methods of stress grading of timber mentioning the procedure, advantages, disadvantages and timber classification.
Determine the hydraulic gradient and the direction of water : Determine the hydraulic gradient and the direction of water flow across the aquitard.
Project Analysis Process Assignment : Project Analysis Process Assignment Help and Solution Colorado State University - Homework Help - What activities occur during each step/phase

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine how many grams of co2 are dissolved in the water

Four liters of water are equilibrated with a gas mixture containing carbon dioxide at a partial pressure of 0.3 atm. Henry's law constant for H2CO3* solubility is 2.0g/L-atm.

  Find difference in mercury levels inside and outside tube

A glass tube with inside diameter of 2-mm is inserted vertically into a dish of mercury at 20°C. Determine the difference in mercury levels inside and outside the tube.

  Calculate the moment of inertia of the hollow rectangular

A hollow rectangular steel beam is 18 cm deep by 10 cm wide, outside dimensions. The walls are 2 cm in thickness. From the shear and moment diagram, the maximum vertical shear on the section is 180 kN

  Determine the return periods of occurrence of a hurricane

A city is subjected to occurrence of hurricane and tornado with the average probabilities of 0.3 and 0.2 per year, respectively. Assume occurrence of these events is statistically independent.

  What is the limiting drawing ratio (ldr) for this material

Ravg for a metal where the R values for the 0°, 45°, and 90° directions are 0.9, 1.7, and 1.8, respectively. W hat is the limiting drawing ratio (LDR) for this material?

  Calculate the angle a between the vectors a and c

If A cross product B = the vector C, calculate the angle "a" between the vectors A and C and between the angle "b" between the vectors B and C.

  Determine the compositions and quantities of gas and liquid

Determine the compositions and quantities of gas and liquid when 1 lb mole of a mixture of 30 mole percent methane and 70 mole percent ethanol is brought to equilibrium at 0 F and 500 psia.

  Determine the factor of safety against overturning

The factor of safety is defined as the ratio of the stabilizing moment divided by the overturning moment. The densities of concrete and water are = 2.40 and = 1 , respectively. Assume that the dam does not slide.

  What will be the time-mean speed and space-mean speed for

Assume you are an observer standing at a point along a three-lane roadway. All vehicles in lane 1 are travelling at 30 mi/h, all vehicles in lane 2 are travelling at 45 mi/h, and all vehicles in lane 3 are travelling at 60 mi/h. There is also a const..

  Determine the maximum additional deformation of the spring

A spring is used to stop a 50 kg package which is moving down a 20 degree incline. the spring has a constant of 30kN/m and is held by cables so that it is initally compressed 50mm

  Determine which should be the tangent function

in the first couple steps you are using the sine function to derive that the interior triange BCG is a right triangle. However, the sine function, by definition, is opposite divided by hypotenuse.

  At what depth will water flow in a 10 m wide channel

At what depth will water flow in a 10 m wide rectangular channel, if n=0.01, S=0.0015 and Q=9m^3/s

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd