Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
The charge entering the positive terminal of an element is given by the expression q(t) = -10e-8.65t mC. The power delivered to the element is p(t) = 4.9e-8t W. Compute the current in the element as a function of time, the voltage across the element as a function of time, and the total energy delivered to the element in the time interval 0 < t < 100 ms.
i(t) = io e-k t, where io = mAand k = s-1.Further, v(t) = vo e-C t, where vo = Vand C = s-1.Total energy delivered in 100 ms = J
Design a differential input difference amplifier for a differental voltage gain of Ad=20. There are no stipulations for minimum or resistance values. What is the input resistance of the differential amplifier
An analog signal ranging between 0 and 1 V must be quantized. The midrange quantization errors must be no greater than 0.1V. How many quantization bits must be used to satisfy this requirement
You are given a black box, a 6 k Ohm resistor, a 40 nF capacitor, a voltmeter, and an ammeter. With these supplies you complete the following measurements at 950 Hz: You place the resistor and capacitor in series and measure a current flowing.
A three-bit Johnson counter is clocked with pulses at a 120 MHz rate. What will be the pulse frequency of the output of the last flip-flop in the chain. Ten pulses are applied to a four-bit asynchronous counter. If the counter state was 0000 befor..
what are the application of backward diode
A 1500 hp phase ac motor load has a power factor of 0.7. What capacitor (in Farads) is required to correct the power factor to 0.90 if the line voltage is 2400 volts The capacitor bank is to be delta connected.
The O.C and S.C test data are given below for a single phase, 5 kVA, 200V/400V, 50Hz transformer. O.C test from LV side:200V 1.25A 150WS.C test from HV side:20VV 12.5A 175W
A star-bus hybrid topology consists of a main three branch star toplogy with each branch connecting three stations in a bus topology. This toplogy is changed to a new bus-ring hybrid topology with main five station bus topology.
A temperature sensor has a static transfer function of 0.15 mV/C° and a time constant of 3.3 s. If a step change of 22° to 50° C is applied at t=0, find the output voltage at 0.5 s from t=0s to t=10s. What is the indicated temperature at these tim..
What is the power level entering the first active stage of the receiver at 1900 MHz being fed by a 25 meter coax with a loss of 20 dB/km, given that the Isotropic Receive Level is -134 dBW and the receiving station has a 1 meter radius dish
Calculate: i. The A, B, C, D constants of the line. ii. The characteristic impedance of the line. iii. The sending-end voltage iv. The sending-end current. v. The sending-end power factor. vi. The sending-end power. vii. The power loss in the line..
A 3kw, 120V, 2400 rpm shunt motor has an armature resistance of 0.4 ohms and a shunt field resistance of 160 ohms. The motor operates at full load. The no load current is 2A. If an external resistance of 2.5 ohms is insertions in the armature circ..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd