Compute the corrected horizontal distance for the following

Assignment Help Civil Engineering
Reference no: EM13548047

1.In taping from A to B, a tree on-line necessitated setting an intermediate point C offset 4.5ft to the side of line AB. Line AC was then measured as 368.92ft along a uniform 4% slope. Line CB on horizontal ground was measured as 285.10ft. Find the horizontal length of AB.

2.Compute the corrected horizontal distance for the following conditions: Temperature: 25oC Tape length: 29.990m Slope angle: -3o42’ Slope measurement: 211.416m

Reference no: EM13548047

Questions Cloud

Describe the breakthrough curve you would expect : Describe the breakthrough curve you would expect for transport of a non-reactive solute injected as a finite pulse of duration 1 hour in a designed steady stat
Determine each of the following from the output : Determine each of the following from the output:
What is the approximate sludge age in this system : An aeration system with a hydraulic retention time of 2.5 hours receives a flow of 0.2 MGD with BOD concentration of 150 mg/L. The suspended solids concentration in the aeration basin is
Wentworth medical center text : Wentworth Medical Center text
Compute the corrected horizontal distance for the following : Compute the corrected horizontal distance for the following conditions: Temperature: 25oC Tape length: 29.990m Slope angle: -3o42’ Slope measurement: 211.416m
Do they have the same probability : Do they have the same probability
How many machine-hours were worked during the period : How many machine-hours were worked during the period - Estimate Machine-Hours Worked from Overhead Data
What is the shape of a frequency distribution : What is the shape of a frequency distribution with an arithmetic mean of 12,000 pounds, a median of 12,000 pounds, and a mode of 12,000 pounds ?
Consider the function to determine its root : The following function is used to determine a parachute’s falling velocity. Consider the function to determine its root, the drag coefficient, c such that the velocity, v is 40 m/s after a free-falling time (t) of 10 second. f(c)=(gm/c)(1-e^(-(c/m)t)..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute nominal and effective annual interest rate

A bank is offering to sell 6-month certificates of deposit for $9800. At the end of 6 months, the bank will pay $10,000 to the certificate owner. Compute the nominal annual interest rate and the effective annual interest rate

  Determine the forces on the beam

Determine the forces on the beam and what force is needed at C to put the beam in equilibrium

  Determine probability that at least 7 will ride in carpools

suppose 76% of all commuters ride to work in carpools. if eight workers are randomly selected, find the probability that at least 7 will ride in carpools

  Determine the percentage increase in the discharge the ditch

As part of a drainage improvement project, a drainage ditch will be straightened and cleaned. As a result, the lenght of the ditch will decrease from 1800 ft to 1400 ft and the mannings roughness factor will be reduced to 0.018 from 0.022.

  How to design for a two-lane road in mountainous terrain

A horizontal curve is to be designed for a two-lane road in mountainous terrain. The following data are known: intersection angle: 50 degrees, tangent length: 400 ft, station of PI: 2000+00, e: .08, fs:.16

  Calculate the sequent depth required to form a jump with

Assuming a drag coefficient Cd of 0.6 for the baffle blocks based on the upstream velocity and combined frontal area of the blocks, calculate the sequent depth required to form a jump with the blocks and compare this value to the sequent depth requir..

  Design a suitable pavement consisting of a granular subbase

if the subgrade has a resilient modulus of 103,500kN/m2, design a suitable pavement consisting of a granular subbase with a layer of coefficient of 0.13, a granular base layer with a layer coefficient of 0.14, and an asphalt concrete surface with ..

  Calculate total mass emissions of particulates out of stack

The temperature in the stack is 350 degrees F and the pressure is 725 mm Hg. If the total flow rate of gas out of the stack is 200 standard cubic meters per second, calculate the total mass emissions of particulates out of the stack in kg/day.

  Estimate contact time to achieve an effluent concentration

Estimate the contact time to achieve an effluent concentration of 200 fecal coliforms/100 mL using a Cl2 dose of 3 mg/L if the wastewater temperature is 28 oC. Assume the activation energy (Ea) at pH = 7.4 is 6,500 cal/mole.

  What is the absolute pressure at the surface of the mercury

The container is vented to the local atmosphere. What is the absolute pressure at the surface of the mercury and at the bottom of the container. Assume the conditions of the standards atmosphere prevail for pressure. Use sg = 13.54 for the mercury..

  What is the total change in energy of the hammerhead

a piston moves a 25kg hammerhead vertically down 1m from rest to a velocity of 50m/s in a stamping machine. what is the total change in energy of the hammerhead

  Determine the intensity of w1 and w2 for the resultant force

The post is embedded into a concrete footing so that it is fixed supported. If the reaction of the concrete on the post can be approximated by the distributed loading, determine the intensity of w1 and w2

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd