Compute the cars stopping distance and time

Assignment Help Civil Engineering
Reference no: EM13302455

a car travels on a rectilinear stretch of road at a constant speed v0= 105 km/h. at s=0 the driver applies the brakes hard enough to cause the car to skid. Assume that the car keeps sliding until it stops, and assume that throughout this process acceleration is a= -7.4556. compute the car's stopping distance and time.

Reference no: EM13302455

Questions Cloud

How much kinetic energy does the pump give the ejected water : A pump is required to lift a mass of 770 kg of water per minute from a well of depth 14.2 m and eject it with a speed of 17.5 m/s. How much kinetic energy does the pump give the ejected water
What is the lifetime value of a purchaser : Assume that the profit per box of plain oatmeal is currently $0.50, the profit per box of Apples & Cinnamon is $0.30, and that purchasers buy twice as many Plain Oatmeal boxes as Apples & Cinnamon boxes each year. What is the lifetime value of a "..
Compute the total work they do on the supertanker : Two tugboats pull a disabled supertanker. Each tug exerts a constant force of 1.8×106 one at an angle 17 degrees west of north, What is the total work they do on the supertanker
What is the value of its y component : A position vector in the first quadrant has an x component of 8 m and a magnitude of 10 m. What is the value of its y component?
Compute the cars stopping distance and time : at s=0 the driver applies the brakes hard enough to cause the car to skid. Assume that the car keeps sliding until it stops, and assume that throughout this process acceleration is a= -7.4556. compute the car's stopping distance and time.
How have control systems been changed : What are the key internal and external factors that must considered when designing a control system for organizations? How have control systems been changed by Sarbanes-Oxley requirements?
Obtain the gravitational force on the satellite : A satellite with a mass of 330 kg moves in a circular orbit 8.00 multiply.gif 107 m above the Earth's surface. What is the gravitational force on the satellite
How large a sales increase can the company achieve : Looking ahead to 2005, the company estimates that its assets must increase by 75 cents for every $1 increase in sales. Pierces profit margin is 5 percent, and its payout ratio is 60 percent. How large a sales increase can the company achieve witho..
Plaque are dilated to increase blood flow : 4. How much angioplasty is enough??Angioplasty is a technique in which arteries partially blocked with plaque are dilated to increase blood flow. By what factor must the radius of an artery be increased in order to increase blood flow by a fact..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compare total reactor volume require to remove the substance

Compare the total reactor volume required for 90% removal of a substance that decays according to first-order kinetics with a rate constant of 0.05 day -1 in a CM system that contains a single reactor against a system that contains three CM reacto..

  What will be the new level of service

If an additional 11-ft lane is added (each direction) and all other factors stay the same, what will be the new level of service?

  Use activity coefficients estimated from ionic strength

The total dissolved inorganic carbon (TIC) of a sample of groundwater is 8.33 mM. The temperature of the aquifer is 15C, the pH is 7.5, and the ionic strength is 0.05 M. What is the H2CO3, HCO3-, CO3 2-, and the partial pressure of CO2? [Use activ..

  Steps of dmaic abandoned

Assume that during the analyze stage an obvious solution is discovered. Should that solution be immediately implemented and the remaining steps of DMAIC abandoned?

  Determine height from ground and time at which may pass

Ball A is thrown vertically upward from the top of a 30-m-high building with an initial velocity of 5 m/s. At the same instant another ball B is thrown upward from the ground with an initial velocity of 20 m/s. Determine the height from the ground..

  Find dry unit weight of the sample and water content

An undisturbed soil sample was collected in a sampling tube of internal diameter 5cm. The length of the extracted sample was 10.2 cm and its mass was 360 g. After oven drying the mass reduced to 326.5 g.

  Tape corrections under following conditions

The tape is stretched over three equal spans. Calculate the tape corrections under the following conditions at field, temperature = 85ºF, pull = 18kg, E= 2.109 x 10 6 kg/cm 2

  Determine what is steady state effluent concentration of si

Water flows into and out of a 5 liter tank at a rate of 1 L/min. Within the tank, the mineral apatite is dissolving at a rate of 3x10^-10 moles of Si per m^2 per sec. If the tank contains 10g of the apatite with a specific surface area of 2 m^2/g,

  Draw the influence line for the support reaction

Draw the influence line for the support reaction at A and calculate the support reaction at point

  Oxidization of ammonia during nitirification

what is the final dissolved oxygen concentration (in mg/L) in the waste lagoon after all of the ammonium (NH4 + ) is converted to nitrate? Recall that 4.57 mg of O 2 is need per mg of ammonium (as N) oxidized during nitirification. After all of the..

  Determine the ratio of the mean velocity to the max velocity

velocities in a 200-mm-diameter circular conduit, measured at radii of 0,36,64, and 87 mm were 7.0, 6.8, 6.1, and 5.0 m/s, respectively. Find the approximate values (graphically) of the volume flow rate and the mean velocity.

  Internal element of compression flange

what do mean by outstand element of compression flange, internal element of compression flange and web general

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd