Compute detention time and horizontal flow through velocity

Assignment Help Civil Engineering
Reference no: EM13306090

A Flocculator designed to treat 10 MGD is 48 ft long, 52 ft wide and 12 ft deep. Compute the detention time and horizontal flow through velocity. Do these values satisfy the standards for water works, which stipulate detention time is greater and equal to 30 min and 0.5 ft/min =< v =< 1.5 ft/min.

Reference no: EM13306090

Questions Cloud

Determine what is the departure rate at a parking lot : The arrival rate at a parking lot is 6 veh/ min. Vehicles start arriving at 6: 00 P. M., and when the queue reaches 36 vehicles, service begins. If company policy is that total vehicle delay should be equal to 500 veh-min
What horizontal distance does it travel : If the ball was hit when it was 1.2m above the ground, what horizontal distance does it travel before it lands on the building
What is the velocity of the projectile at the end of process : For simplicity assume the catapult consists of the piston-cylinder geometry (with the piston as the projectile) and that it is positioned horizontally. The steam initially occupies a volume of 1 liter at a pressure of 200 kpa.
A chief operating officer in a health care organization : A chief operating officer in a health care organization in India
Compute detention time and horizontal flow through velocity : Compute the detention time and horizontal flow through velocity. Do these values satisfy the standards for water works, which stipulate detention time is greater and equal to 30 min and 0.5 ft/min =
What is the pressure in pipe at point a consider friction : A reservoir discharge into a 60-inch concrete pipe (rough surface) that discharges freely. what is the pressure in the pipe at point A consider friction, but neglect minor losses.
Write an expression that refers to the first element : Given an ArrayList a , write an expression that refers to the first element of the ArrayList.
Choose a project leader : Choose a project leader who has influenced you the most in your life or career.
Invoke method to tell the air conditioner object to turn on : Using the reference variable, invoke a method to tell the air conditioner object to turn on.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the shear strain at the inner surface

a circular steel tube of length L=1.2m is loaded in torsion. If the inner radius of the tube is 45 mm and the measured angle of twist between the ends is 0.4 degrees, what is the shear strain at the inner surface

  Establish a horizontal distance

a tape is calibrated and found to measure 100.04ft between the 0- and 100-ft marks. what measurements should be laid out to establish a horizontal distance of 682.25ft?

  Calculate distance up ramp using the work energy theorem

A 58.3 degree inclined plan has a spring with spring constant 23,400 N/m attached at the bottom.A 1.2 kg block is placed on the plane and compresses the spring a distance of 2.4 cm from equilibrium.

  Determine the total number of unit cells in the foil

aluminum foil used to package food is approximately 0.001 inch thick. assume that all of the unit cells of the aluminum are arranged so that a is perpendicular to the foil surface.

  Determine the vertical distance climbed

Neglecting the effect of altitude of local gravitional acceleration, determine the vertical distance climbed. Assume an average air density of 1.18 kg/m^3.

  Determine how much area must the heat exchanger have

You have been assigned to design a heat exchanger to cool a gaseous process stream in a chemical plant. The stream flow at 20 kg/s and enters at 431 oK, It has a heat capacity of 3.45 J/g-oC , and needs to be cooled to 402 oK.

  Cause of heading-up of the water surface

A rectangular channel 2.0 m wide carrying a discharge of 2.5 m3/s is to be fitted with a weir at its downstream end to provide a means of flow measurement as well as to cause heading-up of the water surface.

  Explain light-voice controlling system

Light-Voice Controlling System. We are planning to design a new light-voice controlling system. The voices will basically coordinate the crossing of a road by blind people. Suppose the crossing will be operated by two coordinated systems

  Determine the components of the 800 lb force f along axes

determine the components of the 800 lb force f along the oblique axes a and b. also, determine the projections of f onto the a and b axes

  Determine effective annual interest rate for a nominal rate

Determine the effective annual interest rate for a nominal rate of 8% per year, in which is compounded quarterly.

  Determine the normal and shear stresses

The grains of wood in the board make an angle of 20 degrees with the horizontal as shown. Determine the normal and shear stresses that act perpendicular and parallel to the grains if the board is subjected to an axial load of 250 N.(Dimensions l=3..

  Calculate dry unit weight-void ratio-porosity and degree

1. A block of moist soil weighs 12.72 lbs, is 0.1050 ft3 in volume, has a water content of 9.5%, and has a specific gravity of soil solids of 2.7. Assess: Va, Vw, Vs, S, e, gama d. 2. The moist unit weight of a soil is 18.7 kN/m3 Given that Gs=2.71..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd