Compression ratio and inlet pressure to give maximum imep

Assignment Help Mechanical Engineering

Reference no: EM13708887

Design an SI engine operating on an four-stroke air-standard cycle using stoichiometric gasoline is to have a maximum cylinder pressure of 11,000 kPa at WOT. Inlet pressure can be 100 kPa without supercharging, or it can be as high as 150 kPa with a supercharger.

Pick a compression ratio and inlet pressure combination to give maximum indicated thermal efficiency.

Pick a compression ratio and inlet pressure to give maximum imep.

Reference no: EM13708887

Questions Cloud

Pin-connected structure consists of a rigid beam : A pin-connected structure consists of a rigid beam ABCD and two supporting bars. Bar (1) is an aluminum alloy [E = 70 GPa] with a cross-sectional area of A1 = 2,400 mm2. Bar (2) is a bronze alloy [E = 100 GPa] with a cross-sectional area of A2 = 6,00..

Matrices and alpha and beta are scalar values : Write a MATLAB function called zgemm that computes the generalized matrix multiplication alphaAB + betaC using loops, where A, B, and C are matrices and alpha and beta are scalar values. The input order should be (alpha, A, B, beta, C).

Determine the volumetric flow rates at the inlet and exit : Refrigerant 22 enters an insulated compressor operating at steady state as saturated vap or at -16 C with a mass flow rate of 1.5 kg/s. Refrigerant exits at 7 bar, 70 C. Changes in KE and PE from inlet to exit can be ignored. Determine: (a) the volum..

Separate stream of air with mass flow rate : Steam enters a counter flow heat exchanger operating at stead state at 0.07 MPa with a specific enthalpy of 2431.6 kJ/kg and exits at the same pressure as saturated liquid. The steam mass flow rate is 1.5 kh/min. A separate stream of air with mass fl..

Compression ratio and inlet pressure to give maximum imep : Design an SI engine operating on an four-stroke air-standard cycle using stoichiometric gasoline is to have a maximum cylinder pressure of 11,000 kPa at WOT. Inlet pressure can be 100 kPa without supercharging, or it can be as high as 150 kPa with a ..

Single tape turing machine : Double and Two Tape Turing machines - single tape Turing machine

Determine the velocity of the water at the inlet and exit : A pump is employed to deliver liquid water from a pond to a higher elevation. The pump steadily draws water from the pond at a volumetric flow rate of 192 gal/min through a pipe having a 7 in diameter inlet. The exit diameter of the pipe is 2 in. and..

Fan mounted at the inlet of the electronic enclosure : The electronic components of a computer are cooled by air flowing through a fan mounted at the inlet of the electronic enclosure. At steady state, air enters at 18 C, 1 atm. For noise control, the velocity of the entering air cannot exceed 0.9 m/s.

Volumetric flow rate-slip factor using stadolas equation : A centrifual pump is used to raise water against a static head of 18 m. The suction and delivery pipes, both .15m in diameter, have respectively, friction head losses amounting to 2.25 and 7.5 times dynamic head. The impeller, which rotates at 1450 r..

User Account

All Pages