Compression is isentropic to the condenser pressure of

Assignment Help Mechanical Engineering

Reference no: EM13628526

The following figure shows the schematic diagram of a vapor compression refrigeration system using r-134a as the working fluid. This arrangement is used to achieve refrigeration at two different temperatures with a single compressor and a single condenser. The low-temperature evaporator operates at -18°C with saturated vapor at its exit and has a refrigerating capacity of 3 tons. The high-temperature evaporator produces saturated vapor at 3.2 bar at its exit and has a refrigerating capacity of 2 tons.

Compression is isentropic to the condenser pressure of 10bar. There are no significant pressure drops in the flows through the condenser and the two evaporators, and the refrigerant leaves the condenser as saturated liquid at 10 bar. Draw cycle on a T-S diagram and determine:

a) The mass flow rate of refrigerant through each evaporator, in kg/min

b) The compressor power input, in kW

c) The rate of heat transfer from the refrigerant passing through the condenser, in kW

Reference no: EM13628526

Questions Cloud

As an occupational health epidemiologist you are required : as an occupational health epidemiologist you are required to measure the effect of stress on the workers in your

An infinitely -long uniformly charged line of charge with : an infinitely -long uniformly charged line of charge with linear charge density n0.1 cm lies a distance d0.068m from

Drmine a the temperature of the air at the compressor : the turbocharger of an internal combustion engine consists of a turbine and a compressor. hot exhaust gases flow

A uniform electric field aibj intersects a surface of area : a uniform electric field aibj intersects a surface of area a. what is the flux through this area if the surface lies

Compression is isentropic to the condenser pressure of : the following figure shows the schematic diagram of a vapor compression refrigeration system using r-134a as the

A 350 cm diameter loop is rotated in a uniform electric : a 35.0 cm diameter loop is rotated in a uniform electric field until the position of maximum electric flux is found.

Determine the resultant lift force p that this wing : the wing is supported by a strut be with ball-and-socket joints at b and e and by bearings at a and f. the bearings

Consider a regenerative vapor power cycle with two : consider a regenerative vapor power cycle with two feedwater heaters a closed one and an open one. steam enters the

Write all the necessary boundary conditions to determine : consider a solid cylinder of radius r and height h. heat is generated in the solid at a uniform rate of q wm3. one of

User Account

All Pages