Compressed through a poly tropic process

Assignment Help Mechanical Engineering

Reference no: EM13705905

Half a kilogram of nitrogen, initially at 350K and 200Kpa is compressed through a poly tropic process with pv^1.4= constant. If the final temperature is measured to be 400K, find the work in the process.

Reference no: EM13705905

Questions Cloud

Determine the heat transfer and work for both processes : 2.2 lb of ammonia in a piston cylinder assembly undergoes two isothermal processes in series. The first process from an initial state where p1=120lbf/in^2 with a quality is 85% to a final state where the ammonia is saturated vapor. D

Central heating system is to circulate air through the ducts : The 60W fan of a central heating system is to circulate air through the ducts. The analysis of the flow shows that the fan needs to raise the pressure of the air by 50Pa to maintain flow. The fan is located in a horizontal flow section whose diameter..

What pulse frequencies will blade slots appear stationary : A rotating saw blade has 48 teeth and 4 slots. If the room where the saw is used is illuminated with a pulsed light source, at what pulse frequencies will a) the saw blade teeth appear to be stationary? b) The blade slots appear stationary? c) Will t..

Determine the quality of steam at the turbine exit : Consider a 210 MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500o C and is cooled in the condenser to a pressure of 10 kPa. Show the cycle on a T-s diagram with respect to the saturation li..

Compressed through a poly tropic process : Half a kilogram of nitrogen, initially at 350K and 200Kpa is compressed through a poly tropic process with pv^1.4= constant. If the final temperature is measured to be 400K, find the work in the process.

Find the work of the constant process : We have 0.25 lb of refrigerant 134a at 35 psi, and a quality of x=0.15. If it is expanded, in a constant pressure process, to two times its original volume, determine the final temperature, and find the work of the constant process.

Determine the projection of the force : Determine the angle between the two vectors r1 and r2. Determine the projection of the force F along the position vector r1.

What will the tanks pressure be at that point : A 680 liter oxygen tank is filled to the pressure of 13.7 Mpa, and used to help a respiratory patient in a room with a temperature of 20 degrees C. During one treatment, 135 Liters of oxygen is supplied from the tank to the patient. The tank is then ..

What is the phase and the specific volume of water : What is the phase and the specific volume of water at 3000 Kpa and 455 degrees C? Show this state on a PV diagram

User Account

All Pages