Reference no: EM131034185
Final Exam
Phase 1 Change Notice
CONGRATULATIONS! Your initial program design was accepted by Ford FRAP, and you now have the responsibility for designing the complete program that will become your Final Exam Project for the FRAP facility. Since you and your partner already have come up with an initial program (from your Midterm Exam), you are to complete the following steps for this Phase 1 Change Notice:
1. Put together the best possible combination of Ladder Logic from your separate programs into 1 complete program for the Siemens PLC. Configure your program for the correct PLC, the correct Signal Board, and the correct HMI - all this information can be found on the equipment up in the PLC lab. When you complete your initial configuration, call it Final Exam 2016 and make sure each of you has the most updated version of this program.
2. There are only 14 hard-wired Inputs and 10 hard-wired Outputs available on the Siemens PLC. Allocate the following Inputs to the following Tag Names:
- I0.0 - E-Stop
- I0.1 - Start
- I0.2 - DWP Manual
- I0.3 - DWP 1Auto
- I0.4 - DWP 2Auto
- I0.5 - DWP 3Auto
- I0.6 - FWAP/NT Solenoid ON
- I0.7 - FWAP/ST Solenoid ON
- I1.0 - Spare
- I1.1 - Reset
- I1.2 - DWP 2 Select
- I1.3 - DWP 3 Select
- I1.4 - FWAP/NT Select
- I1.5 - FWAP/ST Select
Allocate the following Outputs to the following Tag Names:
- Q0.0 - E-stopQ
- Q0.1 - StartQ
- Q0.2 - FRWS/OKQ
- Q0.3 - DWP 1Q
- Q0.4 - DWP 2Q
- Q0.5 - DWP 3Q
- Q0.6 - FWAP/NT Solenoid ONQ
- Q0.7 - FWAP/ST Solenoid ONQ
- Q1.0 - SpareQ
- Q1.1 - SpareQ
Final Exam
Phase 1 Change Notice
You should probably allocate the above I/O's first, and remember that this is just an Initial Configuration. There may be changes required as you progress through this project, so just relax and do your best with each step as you go. Your goal at this point is to properly configure your program so that it functions like a self-contained program. Also, you should familiarize yourself with the Internal M-bits in the Siemens TIA, as you will be using these also for your completed program. Remember, this is work that you are to be doing on your own. Plan your work and time accordingly. And make sure you back-up your program frequently to an external device such as a flash drive or your own personal UTAD account.
Attachment:- Initial Program Design.pdf
|
Description of details must consider when planning the group
: An explanation of the concerns that might be addressed for this population in that group and a description of which cultural structures and values may oppress, marginalize, alienate, create, or enhance privilege and power for this group.
|
|
Calculate the size of the payments
: A $160,000 mortgage was amortized over 15 years by monthly repayments. The interest rate on the mortgage was fixed at 4.52% compounded semi-annually for the entire period.
|
|
Use of oxygen in patients with cardiac chest pain
: Evidence Based Critique - NUR3022. The purpose of this assignment is to examine best practice guidelines and recommendations from the literature on a specific clinical topic. Use of oxygen in patients with cardiac chest pain
|
|
Describe the target market audience profiles
: Describe the target market (audience) profiles, key buying behaviors, and decision motivators for the consumer target market. Note: Do not pick different target markets for the domestic and international markets.
|
|
Complete program for the siemens plc
: Put together the best possible combination of Ladder Logic from your separate programs into 1 complete program for the Siemens PLC. Configure your program for the correct PLC.
|
|
Role of organisational behaviour at the company
: Focus on worldwide Haigh's Chocolates and funnel it down to Australian base - Role of organisational behaviour at the company
|
|
Optimizing the planning process for pharmaceutical research
: This project is focused on evaluating and proposing algorithms for optimizing the planning process for a pharmaceutical research project. This will involve evaluating multiple factors in order to identify the optimal solution to generation of test..
|
|
Leadership and entrepreneurship
: Llong assignment that is about strategic leadership and entrepreneurship. My company example is a leadership consulting firm that develops leadership skills in existing corporations. The questions are pertaining to this company I have created and the..
|
|
What wil be the principal balance at the end of 2 years
: Nicholas received a loan of $24,000 from the bank at 6.00% compounded monthly. If he had to repay $350 at the end of every month, what wil be the principal balance at the end of 2 years?
|