Combustion process taking place in a sealed container

Assignment Help Mechanical Engineering

Reference no: EM13701704

In a combustion process taking place in a sealed container, 160kg of methane is burned in 560kg of O₂ and 1845kg of N₂ to yield CO, CO₂, H₂O and N₂ as the products of combustion. How many kg of CO are produced?

Reference no: EM13701704

Questions Cloud

The velocity at the nozzle exit : Air at 22 kPa, 220K and 250 m/s enters a turbojet engine in flight at an altitude of 10,000m. The diffusor slows the air down to a very low speed relative to its inlet. The pressure ratio across the compressor is 12. The turbine inlet temperature is ..

Electrical energy into mechanical work : If you knew how much voltage you would generate with a given device and you needed to convert that electrical energy into mechanical work, how would you go about doing that?

Maintain the heated space at a constant temperature : A heat pump is used to heat a building. The outside air temperature is -10 C and the desired inside temperature is 20.3 C. The heat loss through the walls, ceiling, etc, is 30 kW. Determine the ideal coefficient of performance and the minimum power r..

Number of watts that must be supplied to the compressor : A Carnot refrigerator using R-134a absorbs heat from a refrigerated space at 0oC and rejects heat to a kitchen at 27oC.The refrigerant enters the evaporator with a quality of zero and exits with a quality of one. The operating pressure of the evapora..

Combustion process taking place in a sealed container : In a combustion process taking place in a sealed container, 160kg of methane is burned in 560kg of O2 and 1845kg of N2 to yield CO, CO2, H2O and N2 as the products of combustion. How many kg of CO are produced?

First law of thermodynamics : Stone Mountain near Atlanta, GA has a sky ride which a gondola is suspended from a cable that takes people to the top of Stone Mountain as well as back down. [MO4, MO5, MO6]. Using the First Law of Thermodynamics, what would be the most efficient way..

Determine the thermodynamic efficiency and back work ratio : A regenerative gas turbine is planned to operate with inlet conditions of 100 kPa and 300 K, a pressure ratio of 6, a turbine inlet temperature of 1600 K, and a net power output of 150 kW. The effectiveness of the regenerator is 90% and the adiabatic..

Regenerator as well as reheating and intercooling : Air enters a THREE STAGE gas turbine at 100 kPa and 17 degree Celsius. This system uses a regenerator as well as reheating and intercooling.

What speed should the wind tunnel be run : A 1/10th scale model of an airplane is to be tested in a wind tunnel that operates with air at a pressure of 20 atmospheres. The plane is expected to fly at a speed of 500 [km/hr]. What speed should the wind tunnel be run?

User Account

All Pages