Coefficients of volume expansion of mercury and glass

Assignment Help Physics
Reference no: EM13538135

A glass flask has a volume of 900 ml at a temperature of 20° C. The flask contains 895 ml of mercury at an equilibrium temperature of 20°C. The temperature is raised until the mercury reaches the 900 ml reference mark. The coefficients of volume expansion of mercury and glass are 18 x 10-5 K-1 and 2.0 x 10-5 K-1, respectively. The temperature at which this occurs, in °C, is closest to:

Reference no: EM13538135

Questions Cloud

The initial temperature of the copper : A 208 kg copper bar is put into a smelter for melting. The initial temperature of the copper is 300.0 K. How much heat must the smelter produce to completely melt the copper bar? (The specific heat for copper is 386 J/kg?K, the heat of fusion for cop..
A machinist turns the power on to a grinding wheel : A machinist turns the power on to a grinding wheel, at rest, at time t = 0 s. The wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 66 rad/s. The wheel is run at that angular velocity for 37 s and then power is shu..
A machinist turns the power on to a grinding wheel : A machinist turns the power on to a grinding wheel, at rest, at time t = 0 s. The wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 84 rad/s. The wheel is run at that angular velocity for 37 s and then power is shu..
The increase in the length of the pipe : A steel pipe 22 m long, installed when the temperature was 15°C, is used to transport superheated steam at a temperature of 125 °C. Steel's coefficient of linear expansion is 1.2 × 10-5 K-1. The pipe is allowed to expand freely when the steam is tran..
Coefficients of volume expansion of mercury and glass : A glass flask has a volume of 900 ml at a temperature of 20° C. The flask contains 895 ml of mercury at an equilibrium temperature of 20°C. The temperature is raised until the mercury reaches the 900 ml reference mark. The coefficients of volume expa..
Find magnitude and direction of final velocity of the wreck : Two vehicles approach a right angle intersection and then collide. After the collision, they become entangled. If their mass ratios were 1:3 and their respective speeds as they approached were both 13 m/s, find the magnitude and direction of the fina..
Magnitudes for reflected-transmitted waves to incident wave : Consider a string consisting of two densities, p1 in region 1 where x 0. A continuous harmonic wave is incident from the left. What are the ratios of the square of the amplitude magnitudes for the reflected and transmitted waves to the incident w..
Quantity of heat required to raise the temperature : A substance has a melting point of 20° C and a heat of fusion of 2.9 × 104 J/kg. The boiling point is 150° C and the heat of vaporization is 5.8 × 104 J/kg at a pressure of one atmosphere. The specific heats for the solid, liquid, and gaseous phases ..
The temperature at which contact of the rods barely occurs : A brass rod is 48.7 cm long and an aluminum rod is 70.6 cm long when both rods are at an initial temperature of 0° C. The rods are placed in line with a gap of 0.7 cm between them.

Reviews

Write a Review

Physics Questions & Answers

  Estimate the maximum speed of the mass

A spring is hanging from the ceiling. Attaching a 440gg mass to the spring causes it to stretch 18.0cmcm in order to come to equilibrium. What is the maximum speed of the mass

  Determine the minimum amount of rejected heat

A power plant taps steam superheated by geothermal energy to 533 K (the temperature of the hot reservoir), determine the minimum amount of rejected heat

  Determine the index of refraction of mineral oil

A beam of light traveling in air strikes the surface of mineral oil at an angle of 17.8° with the normal to the surface. If the light travels at 2.17 X 108 m/s in the oil, determine the index of refraction of mineral oil

  Determine the net force on the hang glider

A hang glider and its pilot have a total mass equal to 146 kg. While executing a 360° turn, the glider moves in a circle with a 9 m radius. What is the net force on the hang glider

  Find the time that the arrow spends in the air

Find out the time that the arrow spends in the air.

  What is the final velocity of the electron

An electron is accelerated inside a parallel plate capacitor. The electron leaves the negative plate with a negligible initial velocity, What is the final velocity of the electron if you use relativistic mechanics

  How many excess electrons make up this charge

A proton is travelling to the right at. It has a head-on perfectly elastic collision with a carbon atom. The mass of the carbon atom is 12 times the mass of the proton. What are the speeds of each after the collision? What is the direction of the pro..

  What current must the wire have carried

In Oersted's experiment, suppose that the compass was 0.27 m from the current-carrying wire. If a magnetic field of 1/4 the Earth's magnetic field of 5*10-5 T was required to give a noticeable deflection of the compass needle, what current must the w..

  How far is the lens from the film

You want to take a full-length photo of your friend who is 1.94m tall, using a 35.0mm camera having a 50.0mm lens, How far is the lens from the film

  What is its acceleration when it is away from the shoreline

Suppose the slope of a beach underneath the ocean is 20 cm of dropoff for every 1.6 m of horizontal distance. A wave is moving inland, slowing down as it enters shallower water. What is its acceleration when it is 11 m from the shoreline?

  Estimate the velocity of third piece that explodes at rest

An object at rest explodes into three pieces of equal masses. One moves east at 23 m/s,  while the second piece moves northwest at 14 m/s. Estimate the velocity of the third piece? Suppose each piece has a mass of 2 kg.

  What is the cost of using electrical energy to heat

The horizontal component Fx is shown by the histogram below as function of position along x-axis. There is also a kinetic frictional force of 0.50 N between mass and surface.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd