Coal-fired power plant is producing

Assignment Help Mechanical Engineering

Reference no: EM13714389

A coal-fired power plant is producing 10,000 kW (=10 MW) of electrical power. If the plant has a thermodynamic efficiency of 28%, how many kilograms (kg) of coal are being burned per hour to maintain this output? The heat of combustion of coal is 36,000 J/g.

Reference no: EM13714389

Questions Cloud

How long has the tree been dead : An 18.8438 g sample of petrified wood was found in a petrified forest. The sample showed a 14C activity of 11.2 decays/min. How long has the tree been dead

Determine the mass flow rate of air : Air enters a nozzle steadily at 50 psia, 160Â°F, and 155 ft/s and leaves at 14.7 psia and 900 ft/s. The heat transfer from the nozzle to surrounding air is estimated to be 6.0 Btu/lb of air flowing. The inlet area of the nozzle is 0.15 ft2. Based on ..

The heat of combustion of coal : A coal-fired power plant is producing 10,000 kW (=10 MW) of electrical power. If the plant has a thermodynamic efficiency of 28%, how many kilograms (kg) of coal are being burned per hour to maintain this output? The heat of combustion of coal is 36,..

A heat engine operates between reservoirs : A heat engine operates between reservoirs at 1000 and 300 K. Some of the power output from the heat engine drives a refrigerator which operates between 250 and 300 K. The heat-transfer input at 1000 K to the heat engine is 1000 kJ, and the heat trans..

Coal-fired power plant is producing : A coal-fired power plant is producing 10,000 kW (=10 MW) of electrical power. If the plant has a thermodynamic efficiency of 28%, how many kilograms (kg) of coal are being burned per hour to maintain this output? The heat of combustion of coal is 36,..

Cable drum for a crane is to rotate : A cable drum for a crane is to rotate between 160 and 166 rpm. Design a gear drive for 25 hp in which the input pinion rotates at 925 rpm and the output rotates with the drum. The crane is expected to operate with a 50% duty cycle for 120 hours per w..

Determine the minimum power requirement for the pump : The impeller of a centrifugal pump has inner and outer diameters of 14 and 37cm, respectively, and a flow rate of 0.18m3/s at a rotational speed of 1200rpm. The blade width of the impeller is 8.6cm at the inlet and 3.5cm at the outlet.

Calculate the force of impact on the skater : Let's say that one of the skaters in the above video has a mass of 100 kg, and is skateboarding at 9.0m/s when he smacks into a guardrail and comes to a complete stop in 0.2 seconds. Calculate the force of impact on the skater

How long will it keep before its activity is reduced : A 154.7 mCi sample of a radioactive isotope is purchased by a medical supply house. If the sample has a half-life of 14 days, How long will it keep before its activity is reduced

User Account

All Pages