Check the shear resistance of this beam

Assignment Help Civil Engineering
Reference no: EM13561572

A W14x34 section is used as a simply supported beam over a span of 20 ft. The beam is loaded with a concentrated live load of 10 kips at the center of its span, in addition to its own weight.. The dead load includes the beam weight. The steel is A242, Grade 50. Check the shear resistance of this beam. Use the ASD design method only.

Reference no: EM13561572

Questions Cloud

Determine the specific work required : aturated water vapor at 150 deg C is compressed in a reversible steady-flow device to 1000 kPa while its specific volume remains constant. Determine the specfic work required in kJ/kg. The heat transfer is not negligible.
Corporate social responsibility : Corporate Social Responsibility
Design method to select the most economical beam section : A simply supported steel beam carries a factored concentrated load of 25 kips at the center of its 36-ft span. The beam has lateral support at the center of the span and at both ends (Lb = 18 ft). Use the AISC design
The results of the marketing research : The results of the marketing research
Check the shear resistance of this beam : A W14x34 section is used as a simply supported beam over a span of 20 ft. The beam is loaded with a concentrated live load of 10 kips at the center of its span, in addition to its own weight.
Suggest a hen managentment strategy that will maximize : A polutry farm owns 100 laying hens. Each week a hen can either lay 12 eggs or hatch 4 eggs, but not both. At the end of the four-week period all eggs and chicks will be sold: an egg will bring 10 cents, and a chick will bring 60 cents.
Descriptive material has negligible value : Descriptive material has negligible value and should be avoided. We are seeking analysis, discussion and recommendation, enriched by ideas found in journal articles.
Determine the lifetime risk of a resident : Consider a small town in the Phillippines, where the average weight of people is 55 kg, and the average lifespan is 60 years. The people here eat lots of fish due to abundant availability from the local river.
Determine the risk to the workers who work 8 hours/day : The natural air flow rate to this industrial shade structure is 90 m3/hour. Determine the risk to the workers who work 8 hours/day, 50 weeks/year for 30 years. Assume workers are 75 kg and live for 70 years.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what weight of oxygen was put in the tank

When the ambient air is at 70 degrees Fahreneit, 14.7 psia, and contains 21% oxygen by volume, 4.5 lb of air are pumped into a scuba tank, capacity 0.75 ft^3. What volume of ambient air was compressed

  What will be the manometer deflection

The pressure inside a 4 cm hose is 700 kPa. If the water exits through a 2 cm diameter nozzle, what velocity in m/s, can be expected inside the hose ?

  Two streams discharge into a pipe as shown flows are

two streams discharge into a pipe as shown flows are incompressible. the volume flow rate of streams into the pipe is

  Determine the flow area

A rectangular concrete channel is 3 m wide and 2 m high. The water 20 deg Celsius in the main channel is 1.5 m deep and is flowing at a rate of 30 m^3/s. determine the flow area, wetted perimeter, and hydraulic radius. is the flow laminar or turbu..

  Compute the accuracy and compute the final coordinates

The forward direction is given by the alphabeteical order of the station names. Each angle is measured clockwise from the back direction to the forward direction so that they are on the left of the traverse looking forward.

  Calculate the length and diameter of the reaction zone

Calculate the length and diameter of the reaction zone of an afterburner that treats 2000 acfm of polluted air (measured at 250 F). The gases in the afterburner are at a temperature of 1400 F for a residence time of 0.50 sec. Assume the burner will b..

  Engineering ethics and concept and cases

what is the engineering ethics case related to civil engineering with reference and discuss all the engineering ethics issues which covered the "Engineering etics concepte and cases?

  Determine the initial void ratio assume also that settlement

A square building (15 m × 15 m in plan) is to be constructed on a site where the soil profile consists of 3m of clay with an over-consolidation ratio that varies from 5 at the surface to 2 at 3m overlying a 5m thick clay

  What is the number of months required tp pay off the balance

For the same loan described under Q3, the individual decides that instead of selling the house after the 71stpayment, to keep it and shorten the pay off period by increasing the montly payment by $150 each month.

  What is the greatest bending moment and where is it located

A cantilever beam of length 50 ft is embedded in a wall at A and has a free end B. A concentrated load of 100 kips upward is located at x = 25 ft from A. A uniformly distributed load of 20 kips/ft downward extends from 25 to 50 ft.

  A three point problem can be solved by which method

The diffrence b/n the sum of angles of a plane triangle and the sum of angles of sph triangle is one second. when the triangle on the earth surface has an area of about

  Calculate what was the students associated reaction time

The students strikes the sign at a speed of 35mi/h. If the student was travelling at 55mi/h when the sign was first spotted, what was the student's associated reaction time( use practical stopping distance)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd