Change in magnetic properties when steel is heated

Assignment Help Mechanical Engineering

Reference no: EM13713132

1-Describe the theory used for the IZOD test and what units are used to report toughness?

2-Explain the change in magnetic properties when steel is heated. Is this due to allotropic properties?

Reference no: EM13713132

Questions Cloud

Diaphyseal cross section carries a bending moment : Assume that a diaphyseal cross section carries a bending moment M. Let the cross section be circular with inner and outer diameter of 20 and 30 mm, respectively, and assume that the neutral axis (NA) passes through the centroid. Draw the cross sectio..

Calculate the elastic modulus of this material : A cylindrical specimen of some metal alloy 8.7 mm in diameter is stressed in tension. A force of 1390 N produces an elastic reduction in specimen diameter of 0.0041 mm. Calculate the elastic modulus (in GPa) of this material if its Poisson's ratio is..

Calculate the thrust force developed by this engine : Air at 12 psia and 60F enters the jet engine of an aircraft flying at a velocity of 500 ft/s. Inlet area of the engine is 4 ft2. Exhaust gases leave the engine with a relative velocity of 900 ft/s. The fuel flow rate is only 2% of the mass flow rate ..

Calculate the blackbody hemispherical spectral intensity : Calculate the wavelength (?) in ?m for maximum blackbody hemispherical spectral emissive power (E,b) at T = 750, 1500, 3000, and 5777 K. Calculate the temperature of a blackbody if its maximum hemispherical spectral emissive power (E,b) corresponds t..

Change in magnetic properties when steel is heated : Describe the theory used for the IZOD test and what units are used to report toughness? Explain the change in magnetic properties when steel is heated. Is this due to allotropic properties?

Conducted on a cylindrical specimen of a ceramic material : A three-point transverse bending test is conducted on a cylindrical specimen of a ceramic material that has a reported flexural strength of 533 MPa. If the specimen diameter is 4.4 mm and the support point separation distance is 50 mm, what is the ma..

Type of non-destructive testing method : Present an overview of (i) impact testing methods, and (ii) non-destructive testing (NDT) methods presented in your textbook. Elaborate on one type of impact testing as well as one type of non-destructive testing method. What are the advantages of us..

What is the secondary side voltage and current : A single phase step up transformer is used to transform 240VRMS to 2400VRMS. The transformer is operating at its rated power of 1kW (with purely resistive load), with transformer Reqp = 5, and a Xeqp = 4j, ignore the magnetising branch.

Three cables are used to tether a balloon as shown : Three cables are used to tether a balloon as shown. Determine the vertical force P exerted by the balloon at A knowing that the tension in cable AD is 481 N. Use a matrix linear equation solution method.

User Account

All Pages