Reference no: EM13805164

Q1: A petrol engine working on the Otto cycle has a compression ratio of 9:1, and at the beginning of compression the temperature is 32° C. After heat energy supply at constant volume, the temperature is 1700° C. The index of compression and expansion is 1.4.

Calculate:

(a) temperature at the end of compression;

(b) temperature at the end of expansion;

(c) air standard efficiency of the cycle.

Q2: In a diesel cycle the pressure and temperature of the air at the start of compression are 1 bar and 57° C respectively. The volume compression ratio is 16 and the energy added at constant pressure Is 1250 kJ/kg. Calculate:

(a) theoretical cycle efficiency;

(b) mean effective pressure.

Q3: An indictor diagram taken from one cylinder of a 6 cylinder 2- stroke engine has an area of 2850 mm² and the length 75 mm when running at 2 rev/s . The indictor spring rate is 1 mm = 0.2 bar. Given that the cylinder bore is 550 mm and the stroke is 850 mm, calculate the indicated power of the engine, assuming each cylinder develops the same power.

Q4: A 6-cylinder, 4-stroke diesel engine has a bore of 150 mm and a stroke of 120 mm. The indicted mean effective pressure is 9 bar, the engine runs at 300 rpm, and the mechanical efficiency is 0.85. Calculate the indicated and the brake power.

Q5: A single 4-stroke engine is attached to a dynamometer which provides a braking load of 362 N. The radius at which the brake acts is 800 mm. If at this load the engine has a speed of 318 rpm, find the brake power.

Q6: A single 4-stroke oil engine has a cylinder diameter of 180 mm and a stroke 300 mm. During a test the following results were recorded,

Area of indicator = 500 mm² 

Length of indicator card = 70 mm

Card scale (spring rate) 1 mm = 0.8

Brake load = 354 N

Brake load radius = 780 mm

Engine speed = 5 rev/s

Fuel consumption = 3.2 kg/h

Calorific value of fuel = 43.5 MJ/kg

Calculate:

(a) the indicted power;

(b) the brake power;

(c) the brake thermal efficiency.