Calculate the work produced and heat rejected by the engine

Assignment Help Civil Engineering
Reference no: EM13319505

A completely reversible heat engine uses a solar receiver for a hightemperature reservoir and a lake for a low temperature reservoir. The sun
maintains the receiver surface at 290 ° F while the lake remains at 40 °F.
Calculate the work produced and heat rejected by this engine when 1000 Btu are transferred from the solar receiver to the engine

Reference no: EM13319505

Questions Cloud

How large could the plant be without having the ground level : A 35 percent-efficient coal-fired power plant with effective height of 100 m emits SO2 at a rate of 0.6 lb/10^6 Btu into the plant. If winds are assumed to be 4 m/s at the stack height and just over 3 m/s at 10 m
Determine the volume of the piece of material : An unknown piece of material with a mass of 5.1 kg and density of 1422 kg/m^3 is suspended from a string and then completely immersed in a container of water. Determine the volume of the piece of material
Calculate the maximum weight that can be sustained : A heavy Machine is lowered into a pt by means of a rope wrapped around an 8" diameter stationary pole placed horizontally across the top of the pit. The coefficient of static friction for the rope on the pole is 0.35.
Explain how much naoh in grams is needed to prepare solution : How much NaOH in grams is needed to prepare 546 mL of solution with a pH of 10.00? The molecular weight of NaOH is 40.0 g/mol. Hint: Since NaOH is a strong base it ionizes (disassociates) completely. The OH- concentration equals the initial concen..
Calculate the work produced and heat rejected by the engine : A completely reversible heat engine uses a solar receiver for a hightemperature reservoir and a lake for a low temperature reservoir. The sun maintains the receiver surface at 290 ° F while the lake remains at 40 °F.
The application of the concepts and techniques : Prepare an Outline for your Final Project based on your approved Project Proposal  The Outline must be structured on the Proposal to ensure the application of the concepts and techniques learnt in this module.
Show that the expenditure approach and the income approach : In a simple economy, suppose that all income is either compensation of employees or profits. Suppose also that there are no indirect taxes. Calculate gross domestic product from the following set of numbers. Show that the expenditure approach and the..
How many bank cubic yards will be required to embankment : You are constructing an embankment of 250,000 cubic yards of material. The material has a shrink percentage of 18%. How many bank cubic yards will be required to complete this embankment
Explain derive the ph henderson hasselback equation : Consider a mixture of salt NaA and weak acid HA. Please derive the pH Henderson Hasselback equation by writing the equilibrium expression. Define the pKa

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute the percent voids in total mix in mineral aggregate

The compacted specimen contains 6% asphalt binder by weight of total mix, and has a bulk density of 143.9 lb/ft^3. Ignoring absorption, compute the percent voids in total mix, percent voids in mineral aggregate

  What will be the value of the vertical stress at the point

What will be the value of the vertical stress at this point immediately after the fill is placed, before any consolidation has occurred. What will it be after consolidation is completed.

  Determine the location where a hydraulic jump forms in flat

A rectangular open channel with a width of 10 ft and n = 0.013 conveys a discharge of 300 cfs. The upstream portion of the channel has a slope of 10%, which then abruptly changes to a slope of zero downstream.

  What is the mass of the earth in pound-mass and kilograms

The Earth may be considered as a sphere whose diameter is 8000 mi. and whose density is roughly approximated to be 6560 kg/m^3. What is the mass of the Earth in pound-mass and kilograms

  Estimate the actual population contributing flow to the main

What is the maximum population that can be served by a 900 mm diameter main sewer constructed on minimum grade. If sewage flow in the pipe never exceeds a depth of 600 mm, estimate the actual population contributing flow to the main.

  Determine the m and o costs for alternative s

Alternative R has a first cost of $100,000, annual M&O costs of $50,000, and a $20,000 salvage value after 5 years. Alternative S has a first cost of $175,000 and a $40,000 salvage value after 5 years

  Determine the magnitudes of the normal force acting on block

The coefficient of kinetic friction between block A and the inclined plane is mu_k = 0.11 . The angle of the inclined plane is given by theta = 45. Neglect the weight of the rope and pulley. Part A - Normal Force Acting on Block A Determine the ma..

  Determine the distance d between a and b

the force-couple system at A is to be replaced by a single equivalent force acting at a point B on the vertical edge of the triangular plane. determine the distance d between A and B

  What is the probability that if purchased car is better

An automobile that you are looking at purchasing has an advertised fuel mileage of 30 miles per gallon. You rent the car for a week and track your mileage to school and back home and get (miles/gallon)

  How many days would need to use the equipment each year

How many days would they need to use the equipment each year to justify purchasing the equipment? To purchase equipmet/ Buy at $60,000, Operation and maintanence is $120/day, life is 5 yrs and salvage value is $5000.

  Calculate the final temperature of the gas for the process

The diaphragm is ruptured and fluid fills the entire volume of the vessel. Assume that the fluid is an ideal gas. After you have determined Qsub12, Wsub12, and delta U for the process, calculate the final temperature of the gas.

  What is the minimum chain length for the application

A motorcycle sprocket on the rear wheel has a diameter of 24 cm, and trhe driver sprocket has a diameter of 4.0 cm. The driver sprocket shaft and rear axle are 60 cm apart.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd