Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Carbon dioxide contained in a piston-cylinder device is compressed from 0.3 to 0.1 m3. During the process, the pressure and volume are related by P= aV-2, where a 8 kPa · m6. Calculate the work done on the carbon dioxide during this process.
Benzene is a toxic chemical used in the manufacturing of mechanical chemicals. A manufacturer claims that its exit (effluent) water meets the federal regulation standards with a mean of less than 7980 ppm of benzene.
A rectangle commercial building must be laid out 200.00 ft wide and 300.00 ft long. if the steel tape used is 100.02 ft long under standard conditions, what distances would be laid out?.
At 6% interest, how much money is required in the trust fund to provide for the laboratory and equipment and its perpetual operation and equipment replacement?
A toothpaste factory situated on a large river disposes of a waste water containing villiamite (NaF) to the river on a continuous basis. The minimum flow in the river is 210 m3/s, and the discharge rate from the treatment plant is 12.5 m3/s.
A dam has a parabolic shape z/zo = (x/xo)2, with xo = 10 ft and zo = 24 ft. The fluid is water, gamma = 62.4 lbf/ft3, and atmospheric pressure may be omitted.
of 2640 psi with a factor of safety of 2.0 with respect to yielding. the yield stress of the steel is 65,000 psi in tension and 32,000 psi in shear. the diameter of the tank is 7.0 in. the minimum required wall thickness is 0.289 in.
A trapezoidal canal of side slopes 1V : 2H, and having n = 0:017 is to carry a uniform flow of 37 m^3/s on a slope of 0.0005 at a depth of 1.5 m. Calculate the base width of channel
We requiere to design combined footing which will support a load of two columns ( the two columns rest on the same footing). The columns are squared, with a width of 12" and are at a distance of 15' from centre to centre. Determine the dimensions of ..
A manually cleaned bar screen has bars with a thickness of 8-mm (0.31-in) and openings 25-mm (0.98-in). After operating for a period of time, assume that the opening size decreases
How to determine maximum positive and maximum negative factored design moments at a certain point
The distance from the center of the plate to the point of contact between the plate and the roller is 12 cm. The radius of the roller is 0.5 cm. Assuming no slip between the wheels and the plate, determine the rotational speed of the rollers.
A W14x34 section is used as a simply supported beam over a span of 20 ft. The beam is loaded with a concentrated live load of 10 kips at the center of its span, in addition to its own weight.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd