Calculate the weight of the waste gas processed per min

Assignment Help Civil Engineering
Reference no: EM13303195

A gas containing 80% CH4 and 20% (by mole) He is sent through a quartz diffusion tube to recover the He. 20% by weight of the original gas is recovered and its composition is 50% He. Calculate the weight of the waste gas if 100 kmol of feed gas are processed per min.

Reference no: EM13303195

Questions Cloud

The us health care system and other countries : The US health care system and other countries.
What is the buoyant force exerted on it by the air : An empty storage tank has a volume of 144 ft3. What is the buoyant force exerted on it by the air
How much power is required to overcome aerodynamic drag : a new sports car has a drag coefficient of 0.30 and a frontal area of 21 ft^2, and is traveling at 119 mi/h. how much power is required to overcome aerodynamic drag if p = 0.002378 slugs/ft^3
Find volume of water per second leaks into the ship : A ship is floating on a lake. Its hold is the interior space beneath its deck; the hold is empty and is open to the atmosphere. What volume of water per second leaks into the ship
Calculate the weight of the waste gas processed per min : A gas containing 80% CH4 and 20% (by mole) He is sent through a quartz diffusion tube to recover the He. 20% by weight of the original gas is recovered and its composition is 50% He.
What is the input force : Use Pascal's principle. Given that Fout is 68 lb., the areas of the output and input cylinders are Aout 21 in2 and Ain 6 in2, what is the input force
An important concept in organizational behavior : Individual diversity is an important concept in organizational behavior
Explain the service in technical terms : Describe the service in technical terms. Make sure to include pricing information. Note: You may need to contact the provider to obtain this information
Find best possible angular resolution that can be achieved : Radio telescopes use radio waves (instead of light) to produce images. what is the best possible angular resolution that can be achieved

Reviews

Write a Review

Civil Engineering Questions & Answers

  Comparative analysis of the types of safeguards

Provide a comparative analysis of the types of safeguards would you suggest for the company's information system.

  Spreader beam and hoisted by a crane

The 3.5mg engine is suspended from a 500 kg spreader beam and hoisted by a crane which gives it an acceleration of 4m/s^2 when it has a velocity of 2m/s. determine the force in chains AC and AD during the lift.

  Determining pressure in a coal mining dragline

The total flow then moves to a point W on the traction drive two metres off the ground, and travels through a nine millimetre diameter conduit. Ignoring all friction and minor losses, determine the pressures at points H and W.

  Compute the normal flow rate through the channel

A large drainage channel has a trapezoidal cross section with a bottom width of 75 feet and bank side slopes of 4:1 (H:V). If the normal depth of flow is 25 feet, compute the normal flow rate through the channel (Q in cfs).

  Explain can the system be viewed as being a pure substance

A system consists of liquid oxygen in equilibrium with oxygen vapor. How many phases are present The system undergoes a process during which some of the liquid is vaporized.

  What is the smallest particle size that will be removed

What is the smallest particle size (density 2.65 g/cm3) that will be removed in a horizontal grit chamber 10 m long and 1.0 m deep if the flow rate is 1000 m3/hr. Assume the temperature of the water is 25°C.

  Determine the tension t and the reaction at b and d

Two transmission belts pass over sheaves welded to an axle supported by a thrust bearing at B and a journal bearing at D. The sheaves A has a radius of 50mm, and the sheave at C has a radius of 40mm.

  Determine maximum concentration of chlorides to be observed

A non-reactive chloride solution is continuously discharged into an aquifer. The concentration at the discharge location is 800 mg/L. Determine the maximum concentration of chlorides to be observed at an observation well 30 m downstream of the disc..

  What is the magnitude of the force s if the angle is given

A pile resists the tension developed by three stay cables for a major tent (Membrane) Structure. Assuming no bending is desired in the pile (no resultant horizontal component), what is the magnitude of the force S if the angle \thetaS = 30 degrees

  What should the removal efficiency of a process designed

Wastewater flow of 2000 m3/day containing 120g/L of salt. Discharge into a river with a flow of 34,000 m3/day and a salt concentration of 50 mg/l. The agency wants to maintain the salt level to no greater than 250 mg/L downstream of the discharge.

  Determine what is the rotational velocity at the instant

A fan blade, initially at rest, rotates with a constant rotational acceleration of 0.9rad/s^2. What is its rotational velocity at the instant it goes through an rotational displacement of 5 radians

  Plot the variation with depth

Plot the variation with depth (z) of the at-rest lateral earth pressure behind the wall, and determine the magnitude and location of the at-rest lateral earth force per unit length of wall.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd