Calculate the vbi-nd-w-xn and xp

Assignment Help Electrical Engineering
Reference no: EM13273762

A pn-junction is uniformly doped and has dopant concentration of NA = 4 x10^16 cm-3 in the p-region at 300K. AT zero bias, 20% of the total space charge region (W) is extended in the p-region.
Calculate Vbi, ND, W, xn and xp. Given that ni = 1.8 x 10^6 cm-3 and e=1.16 x 10^-12 F/cm.

Reference no: EM13273762

Questions Cloud

What is the initial payment : After the first five years, the payments are to be adjusted so that the loan can be amortized over the remaining 25-year term. What is the initial payment? What will the balance be after 5 years?
Explain the al concentration of the solution was found : To extract Al from glass, 200 mL of EDTA were mixed with .50g of glass particles and allowed to equilibrate over time. The Al concentration of the solution was found to be 5.25 mcM. If the glass contained .40 wt% Al, what percent of Al was extract..
What about depreciation : Why should Joshua and Jim consider building a portfolio by investing in real estate income property? Are there any special considerations that should be taken into account when it comes to taxation of income property? What about depreciation?
What is the energy of the ground state : A certain type of molecule has an excited energy states, plus the minimum energy ground state. what is the energy of the ground state
Calculate the vbi-nd-w-xn and xp : A pn-junction is uniformly doped and has dopant concentration of NA = 4 x10^16 cm-3 in the p-region at 300K. AT zero bias, 20% of the total space charge region (W) is extended in the p-region. Calculate Vbi, ND, W, xn and xp.
What is briggs & stratton capital gains yield : What growth rate would you have to use in the multiple-period valuation model to get the same expected return as you computed previously? What is Briggs & Stratton's capital gains yield?
Compute the woods age : A sample of wood from an archaeological excavation is dated by using a mass spectrometer to measure the fraction of 14C atoms. What is the wood's age
Which of the above actions would improve this ratio : Now assume that General Hospital has a current ratio of 1.2. In this situation, which of the above actions would improve this ratio?
Find the p-n junction led current with doping : An Al0.3Ga0.7As p-n junction LED with doping level ND = 1 x 10^18 cm-3 on n-side and NA=1x10^15 cm-3 on p-side has Vf = 0.9 V forward bias across its junction. The LED cross-section is 200 µm x 200 µm.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is speed and developed torque when drawing current

A series connected DC motor has R_F + R_A = 11.5 ohm and draws 1 A of current from a DC voltage source with V_T = 18 V while running at 1000 rpm. What is the speed and developed torque when drawing 0.75 A of current

  Give possible allocation of subnets using cidr notation

Allocate this block to 3 different customers. Customer 1 requires a block at least 10 addresses, customer 2 requires 254 addresses, customer 3 requires 2 addresses. Give a possible allocation of these subnets using the CIDR prefix notation.

  What is the magnitude and angle of the current flowing

Given a voltage of 100 volts with a phase angle of 0 degrees, applied across an impedance of 50 ohms at an angle of +30 degrees. This is an inductive impedance - not TOTALLY inductive, but more inductive than capacitive.

  Find what is direction of robot arm in closed loop system

The controlled variable in a closed-loop system is the direction of a robot arm. Initially, it is at 50o; then it is commanded to go to 15o. When the error is 10o for the first time, what is direction of the robot arm

  Calculate the minimum value of vd

Calculate the minimum value of Vd if the power flow through the converter is 5 kW (a) from the ac to the dc side and (b) from the dc to the ac side.

  Explain concept of differential encoding for bpsk modulation

a) What is the key difference between coherent and non-coherent demodulation b) Explain the concept of differential encoding for BPSK modulation.

  What approximate minimum ber is required for voice signals

What approximate minimum BER is required for voice signals, data signals and what is the approximate BER level for the optical fiber systems ?

  Calculate the magnetic flux density b at a point p

Calculate the magnetic flux density B(vector) at a point P specified in spherical coordinates. Express the answer in terms of the magnetic dipole moment m(vector) . For full credit, fill all the details and justify all the assumptions adopted.

  Calculate the net radiation heat transfer from the cavity

Consider a cylindrical cavity of diameter D=100 mm and depth L=50 mm whose sidewall and bottom are diffuse and gray with an emissivity of .6 and are at a uniform temperature of 1500 K. The top of the cavity is open and exposed to surrounding that ..

  Determine the value required for any pre-scaling

A PWM is used in 8-bit mode to produce a signal with a 1 msec period and 60% duty cycle. Determine the value required for any pre-scaling, and the values for the period, and duty cycle registers. The E-clock is 24 MHz.

  What are the contents of the register after each shift

The contects of a six-bit register are initially 100101. The register is shifted four times to the right, with the serial input being 1101. What are the contents of the register after each shift

  Determine the bounce angle and the group velocity v

Light of free-space wavelenth lambda_0= 0.87 micrometers is guided by a thin planar film of width d=2 micrometers and refractive index n_1=1.6 surrounded by a medium of refractive index n_2=1.4.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd