Calculate the unit weight and dry unit weight of the soil

Assignment Help Civil Engineering
Reference no: EM13315301

A cube of moist soil weighs 330 lb and has a volume of 3.00 ft3. Its moisture content is 27.0% and the specific gravity of solids is 2.72. Compute the void ratio, porosity, degree of saturation, unit weight and dry unit weight of this soil.

Reference no: EM13315301

Questions Cloud

Compute the degree of saturation-density and dry unit weight : The mass of the compacted soil is 1.91 kg, and its moisture content is 14.5%. Using a specific gravity of solids of 2.66, compute the degree of saturation, density (kg/m3), unit weight (kN/m3), unit weight (kN/m3) and dry unit weight of this compa..
Consider any of the supercomputing examples : Consider any of the supercomputing examples we discussed in class, and find a scientific paper describing it. Although you can use Wikipedia and similar sites as a starting point, you must find an article in a valid IEEE or ACM publication (journa..
How fast is the center of mass of the two-stonesystem moving : A stone is dropped at t = 0. A second stone, with 2 times the mass of the first, How fast is the center of mass of the two-stone system moving
Analysis of financial performance : Analysis of Financial Performance
Calculate the unit weight and dry unit weight of the soil : A cube of moist soil weighs 330 lb and has a volume of 3.00 ft3. Its moisture content is 27.0% and the specific gravity of solids is 2.72. Compute the void ratio, porosity, degree of saturation, unit weight and dry unit weight of this soil.
Calculate the maximum and minimum possible dry unit weights : Find the moist unit weight of sand in lb/ft^3compacted in the field at a relative density of 60%and moisture content of 10%Given Gs=2.65. Also calculate the maximum and minimum possible dry unit weights that the sand can have.
How much energy does the same inductor store : If an inductor carrying a 1.40 A current stores an energy of 0.250 mJ, How much energy does the same inductor store if it carries a 2.9 A current
What force does the ion exert on the water molecule : The water molecule H2O, with a permanent dipole moment of magnitude of 6.2x10^-30 Cm, What force does the ion exert on the water molecule
How much water would it yield if water declined uniformly : A confined aquifer has a specific storage of 2.5*10^-6 ft^-1 and a thickness of 200 ft. How much water would it yield if the water declined 5.5 ft uniformly over a circular area with a radius of 1000 ft

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the total volume of the vocs emitted each day

Assume that there were 1,100,000 vehicles making a 28.5-mi round trip per day, the average vehicle emission rate for VOCs is 1.3 g/VM , and the molecular weight of the VOC emissions from the mobile sources can still be represented by that of metha..

  Determine the components of the reactions at a and g

Two 9-in.-diameter pipes (pipe 1 and pipe 2) are supported every 7.5 ft by a small frame like that shown. Knowing that the combined weight of each pipe and its content is 30 lb/ft and assuming frictionless surfaces

  Determine the initial length of the rod measured

To determine the original length of a slender rod given the normal strain and deformation experienced by the rod due to an applied axial load. rod AB is subjected to the loading of two blocks, each of weight W

  Calculate weight percent austenite and weight proeutectoid

a .65% Carbon hypoeutectoid plain carbon steel is slowly cooled from 950 degrees C to just slighty above 723 degrees C calculate the weight percent austenite and weight proeutectoid ferrite in this steel

  Explain lift charts in direct marketing

Lift Charts in direct marketing, The mass-mailing business is often used to illustrate the use of lift charts. Another real world application where the lift charts can be used

  What is the axial force in member hj

The frame shown is used to support high-tension wires. If W = 200 lb, b = 3 ft, a = 30°, what is the axial force in member HJ?

  Determine what is the total energy per unit mass

A fluid in an aquifer is 23.6m above a reference datum; the fluid pressure is 4390 N/m2. The fluid density is 0.999E3 kg/m3. What is the total energy per unit mass What is the total energy per unit weight

  Complete level book entries and calculate reduced levels

Determine the maximum allowable misclose for this engineering survey using the formula based on the munber of instriunent stations used in the work.

  Find what design speed was used for a freeway exit ramp

a freeway exit ramp has a single lane and consists entirely of a horizontal curve with a central angle of 90 degrees and a length of 628 ft. if the distance cleared from the centerline for sight distance is 19.4ft, what design speed was used

  Find the bod concentrations at the outlet of both lagoons

The municipal wastewater treatment process for a hypothetiical town consists of two separate lagoons being operated in series. The first lagoon has a volume of 4 million gallons, while the second lagoon has a volume of 2.5 million gallons.

  Determine how much heat had to be transferred to the vessel

Alkaloids are chemical compounds containing nitrogen that can be produced by plant cells. In an experiment, an insulated closed vessel 1.673 m3 in volume was injected with a dilute water solution containing two alkaloids: ajmalicine and serpentine..

  Determine the minimum clearance required

A vertical curve is formed when a rural highway passes under a bridge joining a -8% grade to the horizontal grade satisfying the requirement for safe speed of 90 Km/hr . Determine the minimum clearance required betewen the highway pavement surface..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd