Reference no: EM13975854
1. Test data are given for siltstone from Virginia under simple tension, simple compression, and compression with lateral pressure. The values of σ3 correspond to fracture.
a) Fit the data to Eq. 7.50 in the book to obtain value of m and τi that describes the Coulomb-Mohr failure envelope line. Also calculate µ, ?, and θc
b) Plot the resulting failure envelope line, along with the largest Mohr's circles, for each test. Does the line reasonably represent the test data?
c) Also, calculate the ultimate strengths in compression and tension, σ'uc and σ'ut, that correspond to the fitted C-M failure envelope, and compare these with the actual values from the tests
Note: Use a software for the drawings (excel, Matlab, etc.), do not use our hands.
|
σ3
MPa
|
σ3 = σ2
MPa
|
| 21.9 |
0 |
| -185.4 |
0 |
| -278 |
-7.1 |
| -291 |
-10.49 |
| -343 |
-14.34 |
| -345 |
-19.65 |
| -392 |
-23.1 |
2. Consider a 50 mm diameter shaft of the gray cast iron of Table 7.1. If a safety factor of 3.0 against fracture is required, what is the largest torque that can be applied along with a compressive axial force of 250 kN? (Use M-M criterion)
3. A steel joint in building construction is supposed to be designed to withstand a multiaxial state of stress with the following stress values:
σx = 150, σy = -60, σz = 210, τxy = 50, τyz = τzx = 0 MPa
What is the minimum yield strength required for the material if a safety factor of 2.0 against yielding is required?
a) Employ Maximum Shear Stress Criterion
b) Employ Octahedral Shear Stress Criterion
c) Based on the results from (a) and (b), list all possible options from tables 4.2, 4.3, and 4.4. (DO NO list options for (a) then options for (b), you need to decide if option (a) or option
(b) is safer, then list its options)
Attachment:- corresponding-tables.rar
|
While this case study supports a specific data
: While this case study supports a specific data warehouse product, please locate another case study from another data warehousing Software Company and explain the data warehouse that was designed in that case study?
|
|
Please explain a market analysis of business atmosphere
: Please explain a market analysis of business atmosphere in The Netherlands? General business info would be great. (GDP, GDP per capita, avg. income, etc). Anything you find relevant.
|
|
Donna called her stockbroker henry
: Donna called her stockbroker Henry and told him to purchase 300 shares of Royex Corporation shares at $15 per share, the current market price. Henry agreed to do so, but became distracted and failed to do so. The price of the shares rose $3 in price ..
|
|
Describe the organization
: Describe the organization, its target market, its positioning and its current competitive situation. Also discuss the products that it produces (NOTE: If the company is very large and produces many diverse product lines, narrow focus to just one divi..
|
|
Calculate the ultimate strengths in compression and tension
: What is the minimum yield strength required for the material if a safety factor of 2.0 against yielding is required - Employ Maximum Shear Stress Criterion.
|
|
Describe the various stages of syphilis
: Describe the various stages of syphilis? What are the symptoms of the initial stages of syphilis infection? At what stages are patients infectious to others? Are there mucosal lesions associated with syphilis infection? If so, where are they often..
|
|
Find the electric force between two identical charges
: Two identical charges, each -8.00 x 10-5 C, are separated by a distance of 25.0 cm. Find the electric force between them?
|
|
Why this cohabiting couple eventually broke up.
: After dating for about a year, George and Martha discovered they were going to have a baby.
|
|
What is the speed of the rock just before it hits the street
: What is the speed of the rock just before it hits the street? How much time elapses from when the rock is thrown until it hits the street?
|