Calculate the time average f of the total force tangent

Assignment Help Civil Engineering
Reference no: EM13316755

The 1500kg car has a velocity of 30 km/h up the 10 percent grade when the driver applies more power for 8 s to bring the car up to speed of 60 km/h. Calculate the time average F of the total force tangent to the toad exerted on the tires during the 8 s. Treat the car as a particle and neglect air resistance.

Reference no: EM13316755

Questions Cloud

Define what stress will be necessary to the slip plane : Consider a metal single crystal oriented such that the normal to the slip plane and the slip direction are at angles of 42.1* and 48.9*, respectively, with the tensile axis.
What is the angular misclosure of a seven sided closed-loop : What is the angular misclosure of a seven sided closed-loop traverse with measured angles of G B=132°08’23”, A C=133°35’18”, B D=127°15’08”, C E=123°28’37”, D F=99°55’13”, E G =129°09’49”, and F A=154°26’57”. Adjust the angles to eliminate the misclo..
Determine the subsidence of the clay surface : groundwater is pumped for domestic use from an unconfined aquifer. the thickness of the clay is 40%. after 10 years of pumping, the porosity is reduced to 30%. determine the subsidence of the clay surface.
Find the angular misclosure and the adjusted azimuths : The azimuth from station A of a closed traverse to a control point T1 is 233°12’36”. The azimuth from the last station of the traverse (station G) to a control point T2 is 213°12’15”.
Calculate the time average f of the total force tangent : Calculate the time average F of the total force tangent to the toad exerted on the tires during the 8 s. Treat the car as a particle and neglect air resistance.
How large is the force : Objects A and B are both positively charged. Both have a mass of 118 g, but A has twice the charge of B. How large is the force on A
Determine time average r of total aerodynamic resistance : if the velocity of the sled 10 sec from the start is 200mi\hr, determine the time average R of the total aerodynamic and mechanical resistance to motion. neglect the loss of mass due to exhausted fuel compared with the mass of the sled
What annual volume savings will plant have achieve : The Pomdeterra wastewater treatment plant produces a thick sludge that has a suspended solids concentration of 3.8%. They are investigating a filter press that will yield a solids concentration of 24%.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the probability that the vehicle pulling out

what is the probability that the vehicle pulling out will get in an accident with oncoming traffic?

  Determine the maximum allowable axial tensile force

A 4-cm- diameter rod of aluminum 7075-T6 is to subjected to an axial tensile force such that the factor of safety based on the yield stress on 1.75. Find the maximum allowable tensile force.

  Derive equations for the shear force and the bending moment

(a) Derive equations for the shear force V and the bending moment M for segments: AB, AC and AD (Place the origin at point A). (b) Plot the shear-force and bending-moment diagrams for the beam using the derived functions.

  Calculate the ammonia concentration in mg per l

NH4+ = N+ + NH3 pK =9.24 If the pH is 8.5 and the ammonium(NH4+) concentration in 20mg/L, calculate the ammonia(NH3) concentration in mg/L.

  What are the coordinates of the centroid

For determining the centroid of the area, two square segments are considered; square ABCD and square DEFG. What are the coordinates (x, y ) of the centroid of square DEFG?

  Express samples hardness in meq per l and mg per l of caco3

Hardness is sum of all divalent cations (meaning all species with a positive charge of 2) in a water sample. Magnesium (Mg2+) and calcium (Ca2+) are the most common divalent cations that contribute to hardness.

  Sulphate ions in natural and industrial environments

List some of the common sources of sulphate ions in natural and industrial environments. For a given sulfate concentration, explain which of the following solutions would be the most deleterious and which would be the least deleterious to a permea..

  What is the total equivalent through volume on the approach

An intersection approach volume is 1,500 veh/h and includes 12% left turns with a through-vehicle equivalent of 2.3 tvu's/left turn. What is the total equivalent through volume on the approach

  Determine if a simple supported w beam has the capacity

Determine if a simple supported W 12x26 (A36 steel) beam has the capacity to support loads that produce 50 kips of live-load shear and 20 kips of dead-load shera.

  What is the maximum acceleration that the car can achieve

A car is traveling at 30 mph on a good, dry pavement at sea level. The front-wheel-drive car has a drag coefficient of 0.35, a frontal area of 30 ft2 and a weight of 2500 lbs. The wheelbase is 120 inches and the center of gravity is 20 inches from..

  Write the mass balance equation for a completely mixed lake

Write the mass balance equation for a completely mixed lake with an impulse input of mass,M, added at time t=0. Assume the lake is of constant volume, V, with continuous outflow, Q, and a conservative substance.

  Determine the maximum axial lrfd safe load for the column

A W14x68 section of A992, Grade 50 steel, is used as a steel column with a total unbraced height of 12 ft. The column ends are both fixed. Determine the maximum axial LRFD safe load for this column

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd