Calculate the temperature increase which would induce

Reference no: EM13560416

The pressure vessel is a steel cylinder which is free to expand in radial direction but cant expand longitudinally.It has the external diameter D of 1192 mm and the wall thickness (t) of 9mm

It is designed to contain gas at the operationalpressure P of 1.3 Mpaand the temperature of (-5 Celsius). Calculate the temperature increase which would induce maximum compression in the wall of the vessel equal to the maximum tension. young's modulus for steel can be taken as 200Gpa and the coefficient of thermal expansion as 12*10^-6mm(mm Celsius).

Reference no: EM13560416

Questions Cloud

Calculate average flow rate and hydraulic gradient : A field sample of an aguifer is packed in a test cylinder. The cylinder has a length of 120 cm and a diameter of 12 cm. The field sample with a porosity of 0.24 is tested under a constan

Determine the temperature and mass in the tank when it is : A scuba divers 2 cubic foot air tank is to be filled with air from a compressed air line at 120 psia and 100 degrees F. Initially the air in this tank is at 20 psia and 70 degrees F.

Determine the flow rate per unit width of the auquifer : A confined auquifer with a porosity of 0.15 is 30 m thick. The potentiometric surface elevations at two observation wells 1000 m apart are 52.35 m and 56.90 m. If the horizontal hydraulic conductivity of the auquifer is 25 m/ day determine the flow r..

What volume of sludge must be removed every week : A pre-sedimentation basin has been designed that reduces the river water suspended solids concentration from 500 to 200 mg/L. How many pounds of dry solids does this represent per million gallons of treated water?

Calculate the temperature increase which would induce : The pressure vessel is a steel cylinder which is free to expand in radial direction but cant expand longitudinally.It has the external diameter D of 1192 mm and the wall thickness (t) of 9mm

Find the length and width of a square basin for virus : Find the length and width of a square basin for virus disinfection of a flow of 6 MGD. You may assume a depth of 5 ft, a C?t product of 10 (mg/L) ?min for 1.5-log removal, and a target free chlorine residual of 0.6 mg/L.

When you determine the number of filters needed : A water treatment plant is being designed for a flow of 1.6 m^3/s. How many rapid sand filters, using only sand as the medium, are needed for this plant if cross-sectional area of each filter is 10 m x 20 m?

How many pounds of copper sulfate should be dissolved in the : You have been hired by your local golf course as an environmental consultant to stop the rapid growth of algae in its premier lake at the 18th hole. You have determined that a 0.5 ppm concentration of copper sulfate should be applied

Determine an appropriate pipe diameter and slope : A 100-m reach of sewer is to have a minimum capacity of 200 L/s. The street elevation at the upper manhole is 305.55 m and at the lower manhole is 303.05 m. Determine an appropriate pipe diameter and slope for this reach

User Account

All Pages