Calculate the rise time for the thermocouple

Assignment Help Mechanical Engineering

Reference no: EM13718442

A thermocouple behaves approximately as a first-order system. The element is initially at a temperature of 40°C and suddenly subjected to a temperature of 80°C. The thermocouple indicates a temperature 60°C after 3 s. Calculate the rise time for the thermocouple. How long will it take for the system to reach 99% of steady-state?

Reference no: EM13718442

Questions Cloud

Relationship between independent variables and deflection : The bottom of a large, 5-gallon plastic bucket bows when the bucket is filled with water. The deflection of the bottom surface, ?, is a function of the bucket diameter, D, the depth of water, h, the specific weight of the water, ?, the thickness of t..

Heat transfer coefficient between water and surroundings : A hot-water cylinder contains 150 liters of water. It is insulated, and its outer surface has an area of 3.5 m^2. It is located in an area where the ambient air is 250C, and the overall heat transfer coefficient between the water and the surroundings..

Determine the actual heat transfer rate : A shell and tube heat exchanger with one shell pass and four tube passes is being analyzed to determine the heat transfer rate and the fluid outlet temperatures for prescribed flow rates and inlet temperatures. The cold fluid has a heat capacity rate..

Ratio of the work output to the heat rejection : A Carnot heat engine operates between two reservoirs at temperatures of 400 K and 500 K,. What is the ratio of the work output to the heat rejection?

Calculate the rise time for the thermocouple : A thermocouple behaves approximately as a first-order system. The element is initially at a temperature of 40°C and suddenly subjected to a temperature of 80°C. The thermocouple indicates a temperature 60°C after 3 s. Calculate the rise time for the ..

Determine the net work and heat transfer for the cycle : A piston-cylinder device contains steam that undergoes a reversible thermodynamic cycle. Initially the steam is at 400 kPa and 350C with a volume of 0.3 m^3. The steam is first expanded isothermally to 150 kPa, then compressed adiabatically to the in..

Assume the pressure at pipe inlet is atmospheric pressure : Water drains from a catch basin (with negligible water depth) through a 20-cm diameter, 40 m long concrete pipe flowing full with a surface roughness of 1.2 mm and a downward slope of 2o. Determine the flow rate (volume flow rate) of water from the c..

Explain the difference between ductile and plastic : Material Mechanics- Visous and Plastic. Please extrapolate examples of each and carefully explain how each form. Also, explain how they play roles in deformation. Lasted, explain the difference between ductile and plastic.

Neglect the inlet air velocity to the fan : A fan is located in a 0.5 m x 0.5 m duct. The average air velocity at the fan outlet is 10 m/s and the air density is 1.2 kg/m^3. Determine the mass flow rate of air and the electric power consumption of the fan motor. (Neglect the inlet air velocity..

User Account

All Pages