Calculate the reynolds number and the nusselt number

Assignment Help Mechanical Engineering

Reference no: EM13708468

Calculate the Reynolds number, the Nusselt number, the convective heat transfer coecient (h), and the total heat transfer (Q_dot) for the following:

a) 1g/s of water owing through a 2mm-diameter circular tube, 2cm long, with wall heat flux q'' = 100 W/cm2 and inlet temperature of Ti = 20C.

b)1 g/s of water owing through a 2cm-diameter circular tube, 20cm long, with wall heat flux q'' = 100 W/cm2 and inlet temperature of Ti = 20C. (Does it boil? If it boils, just indicate that it will boil, and calculate the requested parameters for the liquid at or near the inlet.)

c) 2 m^3/s of air owes through a 50m-long, 1m-diameter duct, entering at Ti = 180C. The duct wall is effectively isothermal at Tw = 25C.

Reference no: EM13708468

Questions Cloud

What should be the resistance : The capacitor in an RC circuit has a capacitance of 23.2 µF. what should be the resistance

An extensive study involving thousands of british children : 1. In an extensive study involving thousands of British children, Arden and Plomin (2006) found significantly higher variance in the intelligence scores for males than for females. Following are hypothetical data, similar to the res..

Determine the potential : The charge density inside a sphere of radius a is density rho=cr^(lambda), where lambda is non-negative. Determine the potential V for all r in terms of the charge Q of the sphere

Estimate what is the electric potential difference : Point A is located at 0.50 m away from a charge -2.30 x 10-9 C. point b is located 0.90 m away from the charge. What is the electric potential difference V B- VA between these two points

Calculate the reynolds number and the nusselt number : Calculate the Reynolds number, the Nusselt number, the convective heat transfer coecient (h), and the total heat transfer (Q_dot) for the following: 1g/s of water owing through a 2mm-diameter circular tube, 2cm long, with wall heat flux q'' = 100 W/c..

Find what is the minimum rope tension required : A heavy sled is being pulled by two people as shown in the figure. The coefficient of static friction between the sled and the ground is µs = 0.627, and the kinetic friction coefficient is µk = 0.467. What is the minimum rope tension required

Estimate the capacitance of this system : You are given a parallel plate capacitor with plates having a rectangular area of 15.6 cm2 and a separation of 2.2 mm. Find the capacitance of this system

The area under the density curve : The area under the density curve that lies between 15 and 20 is 0.414. What percentage of all possible observations of the variable are either less than 15 or greater than 20?

Calculate the grash of number-the nusselt number : Calculate the Grash of number, the Nusselt number, the convective heat transfer coefficient (h), and the total heat transfer (Q_dot) in ambient air at Tinf = 30C for the following conjurations:

User Account

All Pages