Calculate the resulting charge on each capacitor

Assignment Help Electrical Engineering
Reference no: EM13292432

Capacitors c1= 8.50μF andc2=3.50μF are charged as a parallel combination across a 36-V battery. Calculate the initial voltage across, and initial chargeon each capacitor.
a) Calculate the resulting charge on each capacitor
The capacitors are disconnectedfrom the battery and from each other. They are then reconnected,positive plate to positive and negative plate to negative.
b)Calculate the resulting charge on each capacitor
c)Calculate the resulting voltage across each capacitor

Reference no: EM13292432

Questions Cloud

What is the smallest radius of an unbanked track : What is the smallest radius of an unbanked (flat) track around which a bicyclist can travel if her speed is 25 km/h
Define solution of racemic 2-butanol : What observed rotation is expected when 1.58M solution of (R)-2-butanol is mixed with an equal volume of a 0.790 M solution of racemic 2-butanol, and the resulting solution is analyzed in a sampling container that is 1 dm long
Evaluate the tension in the cord : block A (mass 2.28 kg) rests on a tabletop. It is connected by a horizontal cord passing over a light, frictionless pulley to a hanging block B (mass 2.57 kg ), evaluate the tension in the cord
What is the rms phasor voltage across the resistor : Given series circuit and parallel circuit consisting of a 100 ohm resistor and a 10 μF capacitor (100 mH inductor-parallel) and a v(t)= 50sin(1000t+0degree) V source, what is the RMS phasor voltage across the resistor for a series circuit
Calculate the resulting charge on each capacitor : Capacitors c1= 8.50μF andc2=3.50μF are charged as a parallel combination across a 36-V battery. Calculate the initial voltage across, and initial chargeon each capacitor. a) Calculate the resulting charge on each capacitor
Determine the yield to maturity on a bond : Using the following parameters determine the yield to maturity on a bond.
Explain what is the value of dh°rxn : A 35.6 g sample of ethanol (C2H5OH) is burned in a bomb calorimeter, according to the following reaction. If the temperature rose from 35.0 to 76.0°C and the heat capacity of the calorimeter is 23.3 kJ/°C, what is the value of DH°rxn. The molar ma..
Compute the magnitude of the initial acceleration of crate : A 66 kg crate is dragged across a floor by pulling on a rope attached to the crate and inclined 15° above the horizontal. what is the magnitude of the initial acceleration of the crate
What are the cash flows associated with the project : However, the clinic has to py the organizers of the exposition a fee for the marketing value of the opportunity. this fee, which must be paid at th end of the second year, is $2 million.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine which waveform in each pair is lagging

Determine which waveform in each pair is lagging: a) 6 cos(100πt-1000) and -6 sin (2π60t+1300)b) cos(10t-1000) and - cos(t-1000) c) cos (50πt - 1000) + cos (50πt - 200) and 9 cos (100πt - 200)

  Compute the ripple voltage and the time duration

(a) Compute the minimum voltage that the output voltage across R1 falls to when both capacitors C1 and C2 are present. (b) Using the same model for D1, compute the maximum voltage that the output voltage across R1 rises to.

  What is base current required and the is for transistor

A pnp power transistor operates with an emitter-to-collector voltage of 5V, an emitter current of 10A, and VEB = 0.85V. For ß = 15, a) What base current is required b) What is the IS for this transistor

  Determine what is the velocity of the child

A child is sitting on the outer edge of a merry-go-round that is 18 m in diameter. If the merry-go-round makes 5.4 rev/min, what is the velocity of the child in m/s

  What is magnitude of force that acts on the center charge

A point charge of +Q is placed at the center of a square and asecond point charge of -Q is placed at the upper left corner. It isobserved that an electrostatic force of 2.0 N acts on the positivecharge at the center.

  Create and graph the pairwise convolution of the functions

Using MatLab, create and graph the pairwise convolution of the following functions (i.e., A must be convolved with B, C, D, and E, individually. B must be convolved with C, D, and E, individually, Etc.). All time scales are -4 to +4.

  What is the maximum average power the source can output

A current source of value 2cos(2t) A is used to power a string of 2W lightbulbs. If you wanted to replace this current source with a DC one, but have the same power drop, what DC current should you apply (one decimal place needed)

  What resistance should be added to the armature current

A dc shunt motor drives a centrifugal pump at a speed of 1000rpm when the terminal voltage and the line currents are 200V and 50A, respectively. The armature and field resistance are 0.1 ohm and 100 ohm respectively.

  What would be initial current through equivalent inductor

a) If the parallel inductor is replaced with a single inductor, what would be the value of the inductor b) What would be the initial current through the equivalent inductor c) Find i_1(t) and i_2(t) and verify that they satisfy using the Kirchoff's C..

  Find what is the output voltage and current of the supply

John's friend Sven has an "automatic crossover" power supply that can output up to 50V and up to 12Amps. What is the output voltage and current of the supply when John connects a 3O resistor to Sven's supply

  Find current from the 9k ohm and combined 15k and 6k

If in an ideal op amp has no current coming out of the inverting terminal and the non-inverting terminal then shouldn't the current going through the 9k Ω resistor be equal to 1mA and also can't the 15k and 6k ohm resistor be combined in parallel

  Determine how many holes are in the valence band

a)How many holes are in the valence band b)If electrons are constantly seeking lower energies and recombining with holes then how can the number of 10billion remain constant.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd