Calculate the resistance of the lamp

Reference no: EM13318727

1. A 0.75 H inductor is in series with a fluorescent lamp, and the series combination is across the 120 V rms, 60 Hz power line. If the rms inductor voltage is 90 V, what is the rms lamp current ? Calculate the resistance of the lamp.

Reference no: EM13318727

Questions Cloud

Design speed station of pc station of pt deflection angle : A horizontal Curve is designed for a two lane mountainous terrain. The following data are known. intersection angle: 40 degrees tangent length: 436.76 ft Station on PI: 2700+10.65 fs=0.12 e=0.08

Determine the work in kj in a friction-less piston-cylinder : Nitrogen expands in a friction-less piston-cylinder device from 0.10 to 0.30 m^3. The process is described by P= 7.4 - 40v + 60v^2 , where P is in bars and V is in cubic meters. Determine the work in kJ.

Estimate the tension in the rope : Consider a beam as shown in the figure that is 2 m long and supported by a rope. It is pressed against the wall. what is the tension in the rope

Determine volume of three identical activated sludge tanks : Determine the volume of three identical activated sludge tanks following primary clarification to aerate 36,000 m cubed/d with a BOD concentration of 180 mg/l at a BOD loading of 560 g/m cubed*d.

Calculate the resistance of the lamp : A 0.75 H inductor is in series with a fluorescent lamp, and the series combination is across the 120 V rms, 60 Hz power line. Calculate the resistance of the lamp

Determine the activated sludge aeration volume required : Determine the activated sludge aeration volume required to treat 2.64 mgd with a BOD of 120 mg/l based on the criteria of a maximum BOD loading of 40 lb/1000 ft cubed/day and a minimum aeration period of 5 hr.

Calculate the surface area required for a stabilization pond : Calculate the surface area required for a stabilization pond to serve a domestic population of 1000. Assume 80 gpcd at 210 mg/l of BOD. Use a design loading of 20 lb of BOD/acre/day.

Calculate the bod loading and days of winter storage : Calculate the BOD loading and days of winter storage available between the 0.6 and 1.5 m depths, assuming a daily water loss of 0.30 cm by evaporation and seepage.

What is the minimum non zero thickness of the oil : A thin layer of oil (n=1.25) is floating on water (n=1.33). What is the minimum non zero thickness of the oil in the region

User Account

All Pages