Calculate the rate of water removal from the condenser the

Assignment Help Mechanical Engineering

Reference no: EM13618146

An air conditioner is used to cool and dehumidify air. We will ignore the temperature aspect and model the air conditioner as a partial condenser. Humid air can be considered a mixture of two components: dry air and water vapor. Fresh feed air containing 3.00% water entering at a rate of 50.0 kg/min is mixed with a recycle stream of previously dehumidified air. All compositions are measured by mass. The mixture enters a condenser that removes a portion of the water in one stream (as pure liquid water). The second stream exiting the condenser contains air of lower humidity, specifically 1.50% water. 70.0% of that air is recycled, as mentioned earlier, and the rest is delivered to a house.

Carefully and completely label the flowchart for this process.

Calculate the rate of water removal from the condenser, the rate of dehumidified (1.50% water) air delivered to the house, and the flow rate and composition of the humid air entering the condenser.

Reference no: EM13618146

Questions Cloud

A study of the amount of time it takes a mechanic to : a study of the amount of time it takes a mechanic to rebuild the transmission for a 2005 chevrolet cavalier shows that

For the compressor the isentropic efficiency is 89 and for : air enters the compressor of an air-standard brayton cycle with a volumetric flow rate of 60 m3s at 0.8 bar 280 k. the

The steam expands through the first turbine stage to 07 : consider an ideal rankine cyle steam power plant with reheat. superheated vapor enters the first turbine stage at 10

If a force f 200 n is applied perpendicular to the bar at : a uniform bar ab of mass m 1.00 kg and length l 30.0 cm lies a horizontal plane. an additional mass m 1.00 kg is

Calculate the rate of water removal from the condenser the : an air conditioner is used to cool and dehumidify air. we will ignore the temperature aspect and model the air

Dtermine the following i the pump work kjkg assuming an : a steam power plant operates on a rankine cycle between pressure limits of 0.08 bar and 80 bar. the heat added by

A pitot-static tube is used to measure the velocity of 20 : a pitot-static tube is used to measure the velocity of 20 degrees c 68f water flowing in an open channel. if a

Determine the standard error of estimate determine the : the city council of pine bluffs is considering increasing the number of police in an effort to reduce crime. before

What pressure differential in inches of hg should exist : an 8 in. id pipe is connected by means of a reducer to a 6 in. id pipe. kerosene flows through the system at 2000

User Account

All Pages