Calculate the rainfall amount from a unit hydrograph

Assignment Help Civil Engineering
Reference no: EM13298239

If direct runoff hydrgraph derived from a unit hydrograph of a catchment (drainage area = 50 acre) is 120 acre-ft, back calculate the rainfall amount. Assume total abstraction in the area is 50%.

Reference no: EM13298239

Questions Cloud

Determine rate of production of final product nd composition : An ethanol plant distills alcohol from corn. The distiller processes 2.0 t/h of feed containing 15% alcohol and 82% water; the rest is inert material. The bottoms (waste) produced is 85% of feed and contains 94% water, 3.5% alcohol, and 2.5% inert..
Determine the absolute pressure of the water in the pipe : Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 2.0 cm, determine the absolute pressure of the water in the pipe
Explain how many moles of naoh must be added to hc2h3o2 : How many moles of NaOH must be added to 1.0 L of 1.2 M HC2H3O2 to produce a solution buffered at each pH? a) pH=3.87 b) pH=5.24
What fraction of the specimens apparent volume is solid : To verify her suspicion that a rock specimen is hollow, a geologist weighs the specimen in air and in water. What fraction of the specimen's apparent volume is solid
Calculate the rainfall amount from a unit hydrograph : If direct runoff hydrgraph derived from a unit hydrograph of a catchment (drainage area = 50 acre) is 120 acre-ft, back calculate the rainfall amount. Assume total abstraction in the area is 50%.
What is the capacitance in nano-farads : The reactance of a capacitor is 2.5 k? at a frequency of 1.5 kHz. What is the capacitance in nano-farads
What runoff volume will show up in nearby stream to baseflow : If a watershed of drainage area 100 mi^2 has abstractions of 2.5 in/hr, what runoff volume will show up in the nearby stream in addition to baseflow for a rainfall of 5-hr duration with an intensity of 4 in/hr
Compute the ph of the resulting solution of hno3 : Consider the titration of 100.0 mL of 0.100 M H2NNH2 (Kb = 3.0 10-6) by 0.200 M HNO3. Calculate the pH of the resulting solution after the 20.0 mL of HNO3 have been added.
What is the angular acceleration of the blades : A ceiling fan is turned on and a net torque of 1.6 N·m applied to the blades. What is the angular acceleration of the blades

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the height h

Determine the height "h" on the wall to which the firefighter can project water from the hose...and the speed of the water at the nozzle is v= 55ft/s. The firefighter is holding the hose 3.5 ft from the ground and the wall is located 15ft from the..

  Describe the measurements that would have to be taken

describe the measurements that would have to be taken and the equations that would have to be used to determine G23, V32, and E2 for a specially orthotropic transversely isotropic material from a single tensile test.

  Determine how long the train blocked the crossing

A train 552 m long is moving on a straight track with a speed of 88.5 km/h. The engineer applies the brakes at a crossing, and later the last car passes the crossing with a speed of 13.7 km/h.

  Determine the couple m required to hold the system

the pin at B is attached to member ABC and can slide freely along the slot cut in the fixed plate. Neglecting the effect of friction, determine the couple M required to hold the system in equilibrium when.

  How many balloons would it take

To float a 160 pound man using helium balloons (assume 0.52 cubic feet per inflated balloon). How many balloons would it take? Assume density of air is 1.29 kg/cubic meter and the density of helium is 0.179 kg/cubic meter.

  Estimate the required surface area

Estimate the required surface area (A), and the diameter and the depth of the tank.

  What is shear force exerted by oil on m long section of pipe

the flow profile is such that u=u(max)*(1-(r/R)^2) where u is the flow speed and r is the distance from the centre of the pipe in the radial direction. What is the shear stress on the pipe wall What is the shear force exerted by the oil on a 1m lo..

  Derive the expression for reversible work

What is work? Why is it path dependant? Derive the expression for reversible work from a closed system containing a simple compressible substance.

  Determine what is the saturation temperature of the system

The aluminum bar has an electrical coil imbedded in it, so that known amounts of heat can be transferred to it. Aluminum has a specific gravity of 2.70 and a specific internal energy given by the formulaU (kJ/kg)=0.94T(C).

  How much will each leg shorten under the applied

given that E for the tube material is 70 GN/m2 and the stool legs are 75cm long, how much will each leg shorten under the applied compressive load (take g = 9.8m/s2)

  Practice autocad software package

To provide knowledge and practice AutoCAD software package for engineering activities.

  Introduction to consolidation settlements

Include immediate and consolidation settlements, but ignore secondary compression. In your calculation, use three sublayers with thicknesses of 4 ft, 8 ft and 16 ft for the top, middle and bottom layers. Ignore any settlement caused by the dense s..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd