Calculate the power provided by the rocket motors

Assignment Help Civil Engineering
Reference no: EM13317018

Two small liquid-propellant rocket motors are mounted at the tips of a helicopter rotor to augment power under emergency conditions. The diameter of the helicopter rotor is 7m, and it rotates at 1 rev/s. The air enters at the tip speed of the rotor, and exhaust gases exit at 500 m/s with respect to the rocket motor. The intake area of each motor is 20cm^2, and the air density is 1.2 kg/m^3. Calculate the power provided by the rocket motors. Neglect the mass rate of flow of fuel.

Reference no: EM13317018

Questions Cloud

Demonstrate effective communication skills : A People Choice Mobile Company just established 2 years in Melbourne and wants to expand their branch to Sydney.
Compute the flow rate in the channel in the jump : A hydraulic jump occurs in a rectangular channel 4.0 m wide. The water depth before the jump is 0.4 m and after the jump is 1.7 m. Compute the flow rate in the channel, the critical depth and the headloss in the jump.
Statuette of a woman from the cycladic civilization : Statuette of a woman from the cycladic civilization is mostly organic in form. The Colosseum in rome features ONLY Corinthian columns. Rembrandt van Rijn virtually created the modern art market
What are the types of stability : What is the center of gravity? How can you find it in various objects? How dooes it effect the equilibrium of an object, What are the types of stability
Calculate the power provided by the rocket motors : Two small liquid-propellant rocket motors are mounted at the tips of a helicopter rotor to augment power under emergency conditions. The diameter of the helicopter rotor is 7m, and it rotates at 1 rev/s.
World court - write a report : The World Court - Visit the International Court of Justice website at icj-cij.org/homepage/index and review the list of all cases section under "Cases" - write a report of 1,000-1,250 words
What was the shear stress on the failure plane at failure : At a confining pressure of 2000 psi, the first sample failed at 9000 psi. Then at a confining pressure of 5000 psi, the other sample failed at 21000 psi. (a) plot the 2 test results on a shear stress-nomal stress diagram and draw in the Mohr envel..
Identify and evaluate organisational change issues : The purpose of this assessment is for you to develop a portfolio of your thinking and work around the discipline of business process modelling. Furthermore, you can retain your portfolio for use as a reference tool in future courses.
The frist aritst to perform a full autopsy : The frist aritst to perform a full autopsy was

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find what is the space-mean speed of the traffic at capacity

on a specific westbound section of highway studies show that the speed-density relationship is u= uf [1-(k/kf)^3.5] It is known that the capacity is 4200 veh/h and the jam density is 210 veh/mi.

  Find the mass of air in a closed chamber measuring

Find the mass of air in a closed chamber measuring 35 ft by 20 ft by 10 ft, when the pressure is 17 lb/in^2 and the temperature is 75°F, assuming air to be an ideal gas

  Four-lane freeway on a mountainous terrain

A four-lane freeway is on a mountainous terrain with 11-ft lanes, a 5-ft right-side shoulder, and a 3-ft left side shoulder. During the peak hour there are 12% trucks and buses and 6% recreational vehicles.

  Determine the temporary hardness and permanent hardness

A well water has the following mineral contents in mg/L: Na+=20; K+=35; Ca+2 =15; Mg+2 =10; Sr=0.5; Cl- =40; HCO3- =65; CO3-2=5; SO4-2=15; and NO3=10.

  Estimate the minimum pressure needed in the chamber

The "supersoaker" water gun can shoot more than 30 ft in the horizontal direction. Estimate the minimum pressure, , needed in the chamber in order to accomplish this. List all assumptions and show all calculations.

  How fast was the car traveling before applying the brakes

The vehicle was estimated to hit the light pole at 30 mph. The skid was 650 feet long. How fast was the car traveling before applying the brakes

  Find what is the maximum you would pay for the bond

A 10-year $2000 Bond with a coupon rate of 10% paid semi-annually is available for purchase. What is the maximum you would pay for this bond if your MARR (without inflation) is 6%, and you estimate an inflation rate of 3% annually

  How to determine the diameter of a drilled shaft pile

Using 1630.56 kN as the ultimate capacity determine the diameter of a drilled shaft pile that would have the same ultimate capacity and depth embedment (11.5 m) using the FHWA method. Neglect shaft resistance. Use a F.S. of 2

  Calculate the average headways and spacing at maximum flow

By assuming a linear speed-density relationship, the mean free flow speed on a highway facility lane equals 65 mph. The jam density is observed to be about 170 vpm. 1. Plot the q-k-u curves

  How to design the slab for minimum overall thickness

A one-way solid concrete slab is to be used for a simple span of 16 ft. In addition to its own weight, the slab carries a superimposed dead load of 50 psf and a live load of 75 psf.

  What should the removal efficiency of a process designed

Wastewater flow of 2000 m3/day containing 120g/L of salt. Discharge into a river with a flow of 34,000 m3/day and a salt concentration of 50 mg/l. The agency wants to maintain the salt level to no greater than 250 mg/L downstream of the discharge.

  Determine psition-velocity and accelerationof particle

x=1.5t^4-30t^2+5t+10 where x and t are exprerssed in meters and seconds, respectively. Determine the psition, the velocity and the acceleration of the particle when t=4 seconds

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd