Calculate the power developed by the turbin

Assignment Help Mechanical Engineering

Reference no: EM13719033

An ideal Rankine cycle uses water as its working fluid. The mass flow rate of water through the cycle is 150 kg/s. saturated vapour enters the turbine at 15 MPa and saturated liquid enters the pump at 10 kPa. Cooling water passes through the condenser at a flow rate of 3 000 kg/s.

Use the state point numbering scheme indicated in the following schematic:

1 Do the following:

a) Draw the state points on a T-s diagram.

b) Calculate the power developed by the turbine, in MW.

c) Calculate the rate of heat transfer to the steam passing through the boiler, in MW.

d) Calculate the power consumed by the pump, in MW.

e) Calculate the cycle’s back work ratio.

f) Calculate the cycle’s thermal efficiency.

g) Calculate the temperature rise of the cooling water that flows through the condenser. The cooling water can be treated as an incompressible liquid. There is a negligible drop in pressure of the cooling water as it flows through the condenser.

Reference no: EM13719033

Questions Cloud

The model of a tidal channel in a coastline study : The model of a tidal channel in a coastline study is scaled to 1/100 of actual size. Fresh water is to be used in place of seawater in the model. Assuming that the Reynolds number must be matched, what model velocity is needed to ensure dynamic simil..

Two standard gears have a diametral pitch : Two standard gears have a diametral pitch of 12 and a gear ratio of 7.0. The center distance is 8 in. Determine the number of teeth on each gear.

Role of international business at the company : Role of organisational behaviour at the company, human resource management practices at the company and role of international business at the company.

Thin films of amorphous si are used for solar cells : If silicon is cooled quickly, it will form a glass instead of crystallizing. One way to do this is to deposit Si atoms onto a cold substrate, with H added to remove defects; these thin films of amorphous Si (with H) are used for solar cells.

Calculate the power developed by the turbin : An ideal Rankine cycle uses water as its working fluid. The mass flow rate of water through the cycle is 150 kg/s. saturated vapour enters the turbine at 15 MPa and saturated liquid enters the pump at 10 kPa. Cooling water passes through the condense..

Quantitatively amount of work needed in these two cases : You can transform a long bar of stainless steel from an initial 25 mm in diameter to 23 mm diameter by either machining or by drawing. Compare quantitatively the amount of work needed in these two cases.

Explain about transaction and transform mapping : explain about transaction and transform mapping

Width from plate for values of the critical reynolds number : Consider atmospheric air at 25 degrees Celsius and a velocity at 25 m/s flowing over both sides of a 1 eter long flat plate that is maintained at 125 degrees Celsius. Determine the rate of heat transfer per unit width from the plate for values of th..

Explain how you define the times of sunrise and sunset : Explain how you define the nodes xk that represent the dates above - Define a global interpolating polynomial Pr that passes through all data points given for the time of sunrise.

User Account

All Pages